From hanumaan, 6 Months ago, written in Plain Text.
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.20.5-200.fc29.x86_64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Seagate Barracuda 7200.14 (AF)
  6. Device Model:     ST3000DM001-1E6166
  7. Serial Number:    Z1F29SN5
  8. LU WWN Device Id: 5 000c50 04fa11fad
  9. Firmware Version: CC45
  10. User Capacity:    3,000,592,982,016 bytes [3.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    7200 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
  17. Local Time is:    Tue Feb  5 00:45:03 2019 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. AAM feature is:   Unavailable
  21. APM level is:     128 (minimum power consumption without standby)
  22. Rd look-ahead is: Enabled
  23. Write cache is:   Enabled
  24. DSN feature is:   Unavailable
  25. ATA Security is:  Disabled, frozen [SEC2]
  26. Wt Cache Reorder: Unavailable
  27.  
  28. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  29. SMART Enabled.
  30. Read SMART Data failed: scsi error badly formed scsi parameters
  31.  
  32.  
  33. === START OF READ SMART DATA SECTION ===
  34. SMART Status command failed: scsi error badly formed scsi parameters
  35. SMART overall-health self-assessment test result: UNKNOWN!
  36. SMART Status, Attributes and Thresholds cannot be read.
  37.  
  38. General Purpose Log Directory Version 1
  39. SMART           Log Directory Version 1 [multi-sector log support]
  40. Address    Access  R/W   Size  Description
  41. 0x00       GPL,SL  R/O      1  Log Directory
  42. 0x01           SL  R/O      1  Summary SMART error log
  43. 0x02           SL  R/O      5  Comprehensive SMART error log
  44. 0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
  45. 0x06           SL  R/O      1  SMART self-test log
  46. 0x07       GPL     R/O      1  Extended self-test log
  47. 0x09           SL  R/W      1  Selective self-test log
  48. 0x11       GPL     R/O      1  SATA Phy Event Counters log
  49. 0x21       GPL     R/O      1  Write stream error log
  50. 0x22       GPL     R/O      1  Read stream error log
  51. 0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
  52. 0xa1       GPL,SL  VS      20  Device vendor specific log
  53. 0xa2       GPL     VS    4496  Device vendor specific log
  54. 0xa8       GPL,SL  VS     129  Device vendor specific log
  55. 0xa9       GPL,SL  VS       1  Device vendor specific log
  56. 0xab       GPL     VS       1  Device vendor specific log
  57. 0xb0       GPL     VS    5176  Device vendor specific log
  58. 0xbd       GPL     VS     512  Device vendor specific log
  59. 0xbe-0xbf  GPL     VS   65535  Device vendor specific log
  60. 0xc0       GPL,SL  VS       1  Device vendor specific log
  61. 0xc1       GPL,SL  VS      10  Device vendor specific log
  62. 0xe0       GPL,SL  R/W      1  SCT Command/Status
  63. 0xe1       GPL,SL  R/W      1  SCT Data Transfer
  64.  
  65. SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
  66. Device Error Count: 4002 (device log contains only the most recent 20 errors)
  67.         CR     = Command Register
  68.         FEATR  = Features Register
  69.         COUNT  = Count (was: Sector Count) Register
  70.         LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
  71.         LH     = LBA High (was: Cylinder High) Register    ]   LBA
  72.         LM     = LBA Mid (was: Cylinder Low) Register      ] Register
  73.         LL     = LBA Low (was: Sector Number) Register     ]
  74.         DV     = Device (was: Device/Head) Register
  75.         DC     = Device Control Register
  76.         ER     = Error register
  77.         ST     = Status register
  78. Powered_Up_Time is measured from power on, and printed as
  79. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  80. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  81.  
  82. Error 4002 [1] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  83.   When the command that caused the error occurred, the device was active or idle.
  84.  
  85.   After command completion occurred, registers were:
  86.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  87.   -- -- -- == -- == == == -- -- -- -- --
  88.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  89.  
  90.   Commands leading to the command that caused the error were:
  91.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  92.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  93.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:52:01.082  READ DMA EXT
  94.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.081  IDENTIFY DEVICE
  95.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:52:01.081  SET FEATURES [Set transfer mode]
  96.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.025  IDENTIFY DEVICE
  97.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  98.  
  99. Error 4001 [0] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  100.   When the command that caused the error occurred, the device was active or idle.
  101.  
  102.   After command completion occurred, registers were:
  103.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  104.   -- -- -- == -- == == == -- -- -- -- --
  105.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  106.  
  107.   Commands leading to the command that caused the error were:
  108.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  109.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  110.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:52:01.082  READ DMA EXT
  111.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.081  IDENTIFY DEVICE
  112.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:52:01.081  SET FEATURES [Set transfer mode]
  113.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.025  IDENTIFY DEVICE
  114.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  115.  
  116. Error 4000 [19] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  117.   When the command that caused the error occurred, the device was active or idle.
  118.  
  119.   After command completion occurred, registers were:
  120.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  121.   -- -- -- == -- == == == -- -- -- -- --
  122.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  123.  
  124.   Commands leading to the command that caused the error were:
  125.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  126.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  127.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  128.   25 00 00 00 08 00 00 38 58 b1 28 e0 00     11:51:57.672  READ DMA EXT
  129.   25 00 00 00 08 00 00 38 58 b1 20 e0 00     11:51:57.630  READ DMA EXT
  130.   25 00 00 00 08 00 00 38 58 b1 18 e0 00     11:51:57.608  READ DMA EXT
  131.   25 00 00 00 08 00 00 38 58 b1 10 e0 00     11:51:57.571  READ DMA EXT
  132.  
  133. Error 3999 [18] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  134.   When the command that caused the error occurred, the device was active or idle.
  135.  
  136.   After command completion occurred, registers were:
  137.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  138.   -- -- -- == -- == == == -- -- -- -- --
  139.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  140.  
  141.   Commands leading to the command that caused the error were:
  142.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  143.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  144.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  145.   25 00 00 00 08 00 00 38 58 b1 28 e0 00     11:51:57.672  READ DMA EXT
  146.   25 00 00 00 08 00 00 38 58 b1 20 e0 00     11:51:57.630  READ DMA EXT
  147.   25 00 00 00 08 00 00 38 58 b1 18 e0 00     11:51:57.608  READ DMA EXT
  148.   25 00 00 00 08 00 00 38 58 b1 10 e0 00     11:51:57.571  READ DMA EXT
  149.  
  150. Error 3998 [17] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  151.   When the command that caused the error occurred, the device was active or idle.
  152.  
  153.   After command completion occurred, registers were:
  154.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  155.   -- -- -- == -- == == == -- -- -- -- --
  156.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  157.  
  158.   Commands leading to the command that caused the error were:
  159.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  160.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  161.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:23.277  READ DMA EXT
  162.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:23.265  IDENTIFY DEVICE
  163.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:51:23.171  SET FEATURES [Set transfer mode]
  164.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:19.668  IDENTIFY DEVICE
  165.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  166.  
  167. Error 3997 [16] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  168.   When the command that caused the error occurred, the device was active or idle.
  169.  
  170.   After command completion occurred, registers were:
  171.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  172.   -- -- -- == -- == == == -- -- -- -- --
  173.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  174.  
  175.   Commands leading to the command that caused the error were:
  176.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  177.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  178.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:23.277  READ DMA EXT
  179.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:23.265  IDENTIFY DEVICE
  180.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:51:23.171  SET FEATURES [Set transfer mode]
  181.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:19.668  IDENTIFY DEVICE
  182.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  183.  
  184. Error 3996 [15] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  185.   When the command that caused the error occurred, the device was active or idle.
  186.  
  187.   After command completion occurred, registers were:
  188.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  189.   -- -- -- == -- == == == -- -- -- -- --
  190.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  191.  
  192.   Commands leading to the command that caused the error were:
  193.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  194.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  195.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  196.   25 00 00 00 08 00 00 38 58 8f 68 e0 00     11:51:15.386  READ DMA EXT
  197.   25 00 00 00 08 00 00 38 58 8f 60 e0 00     11:51:15.356  READ DMA EXT
  198.   25 00 00 00 08 00 00 38 58 8f 58 e0 00     11:51:15.355  READ DMA EXT
  199.   25 00 00 00 08 00 00 38 58 8f 50 e0 00     11:51:15.354  READ DMA EXT
  200.  
  201. Error 3995 [14] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  202.   When the command that caused the error occurred, the device was active or idle.
  203.  
  204.   After command completion occurred, registers were:
  205.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  206.   -- -- -- == -- == == == -- -- -- -- --
  207.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  208.  
  209.   Commands leading to the command that caused the error were:
  210.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  211.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  212.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  213.   25 00 00 00 08 00 00 38 58 8f 68 e0 00     11:51:15.386  READ DMA EXT
  214.   25 00 00 00 08 00 00 38 58 8f 60 e0 00     11:51:15.356  READ DMA EXT
  215.   25 00 00 00 08 00 00 38 58 8f 58 e0 00     11:51:15.355  READ DMA EXT
  216.   25 00 00 00 08 00 00 38 58 8f 50 e0 00     11:51:15.354  READ DMA EXT
  217.  
  218. SMART Extended Self-test Log Version: 1 (1 sectors)
  219. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  220. # 1  Extended captive    Interrupted (host reset)      90%      6052         -
  221.  
  222. Selective Self-tests/Logging not supported
  223.  
  224. SCT Status Version:                  3
  225. SCT Version (vendor specific):       522 (0x020a)
  226. SCT Support Level:                   1
  227. Device State:                        Active (0)
  228. Current Temperature:                    47 Celsius
  229. Power Cycle Min/Max Temperature:     20/48 Celsius
  230. Lifetime    Min/Max Temperature:     12/63 Celsius
  231. Under/Over Temperature Limit Count:   0/0
  232.  
  233. SCT Data Table command not supported
  234.  
  235. SCT Error Recovery Control command not supported
  236.  
  237. Device Statistics (GP/SMART Log 0x04) not supported
  238.  
  239. Pending Defects log (GP Log 0x0c) not supported
  240.  
  241. SATA Phy Event Counters (GP Log 0x11)
  242. ID      Size     Value  Description
  243. 0x000a  2          117  Device-to-host register FISes sent due to a COMRESET
  244. 0x0001  2            0  Command failed due to ICRC error
  245. 0x0003  2            0  R_ERR response for device-to-host data FIS
  246. 0x0004  2            0  R_ERR response for host-to-device data FIS
  247. 0x0006  2            0  R_ERR response for device-to-host non-data FIS
  248. 0x0007  2            0  R_ERR response for host-to-device non-data FIS
  249.  
  250.  
captcha