From hanumaan, 6 Months ago, written in Plain Text.
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.20.5-200.fc29.x86_64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Seagate Barracuda 7200.14 (AF)
  6. Device Model:     ST3000DM001-1E6166
  7. Serial Number:    Z1F29SN5
  8. LU WWN Device Id: 5 000c50 04fa11fad
  9. Firmware Version: CC45
  10. User Capacity:    3,000,592,982,016 bytes [3.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    7200 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
  17. Local Time is:    Tue Feb  5 00:34:25 2019 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. AAM feature is:   Unavailable
  21. APM level is:     128 (minimum power consumption without standby)
  22. Rd look-ahead is: Enabled
  23. Write cache is:   Enabled
  24. DSN feature is:   Unavailable
  25. ATA Security is:  Disabled, frozen [SEC2]
  26. Wt Cache Reorder: Unavailable
  27.  
  28. Read SMART Data failed: scsi error badly formed scsi parameters
  29.  
  30. === START OF READ SMART DATA SECTION ===
  31. SMART Status command failed: scsi error badly formed scsi parameters
  32. SMART overall-health self-assessment test result: UNKNOWN!
  33. SMART Status, Attributes and Thresholds cannot be read.
  34.  
  35. General Purpose Log Directory Version 1
  36. SMART           Log Directory Version 1 [multi-sector log support]
  37. Address    Access  R/W   Size  Description
  38. 0x00       GPL,SL  R/O      1  Log Directory
  39. 0x01           SL  R/O      1  Summary SMART error log
  40. 0x02           SL  R/O      5  Comprehensive SMART error log
  41. 0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
  42. 0x06           SL  R/O      1  SMART self-test log
  43. 0x07       GPL     R/O      1  Extended self-test log
  44. 0x09           SL  R/W      1  Selective self-test log
  45. 0x11       GPL     R/O      1  SATA Phy Event Counters log
  46. 0x21       GPL     R/O      1  Write stream error log
  47. 0x22       GPL     R/O      1  Read stream error log
  48. 0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
  49. 0xa1       GPL,SL  VS      20  Device vendor specific log
  50. 0xa2       GPL     VS    4496  Device vendor specific log
  51. 0xa8       GPL,SL  VS     129  Device vendor specific log
  52. 0xa9       GPL,SL  VS       1  Device vendor specific log
  53. 0xab       GPL     VS       1  Device vendor specific log
  54. 0xb0       GPL     VS    5176  Device vendor specific log
  55. 0xbd       GPL     VS     512  Device vendor specific log
  56. 0xbe-0xbf  GPL     VS   65535  Device vendor specific log
  57. 0xc0       GPL,SL  VS       1  Device vendor specific log
  58. 0xc1       GPL,SL  VS      10  Device vendor specific log
  59. 0xe0       GPL,SL  R/W      1  SCT Command/Status
  60. 0xe1       GPL,SL  R/W      1  SCT Data Transfer
  61.  
  62. SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
  63. Device Error Count: 4002 (device log contains only the most recent 20 errors)
  64.         CR     = Command Register
  65.         FEATR  = Features Register
  66.         COUNT  = Count (was: Sector Count) Register
  67.         LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
  68.         LH     = LBA High (was: Cylinder High) Register    ]   LBA
  69.         LM     = LBA Mid (was: Cylinder Low) Register      ] Register
  70.         LL     = LBA Low (was: Sector Number) Register     ]
  71.         DV     = Device (was: Device/Head) Register
  72.         DC     = Device Control Register
  73.         ER     = Error register
  74.         ST     = Status register
  75. Powered_Up_Time is measured from power on, and printed as
  76. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  77. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  78.  
  79. Error 4002 [1] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  80.   When the command that caused the error occurred, the device was active or idle.
  81.  
  82.   After command completion occurred, registers were:
  83.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  84.   -- -- -- == -- == == == -- -- -- -- --
  85.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  86.  
  87.   Commands leading to the command that caused the error were:
  88.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  89.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  90.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:52:01.082  READ DMA EXT
  91.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.081  IDENTIFY DEVICE
  92.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:52:01.081  SET FEATURES [Set transfer mode]
  93.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.025  IDENTIFY DEVICE
  94.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  95.  
  96. Error 4001 [0] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  97.   When the command that caused the error occurred, the device was active or idle.
  98.  
  99.   After command completion occurred, registers were:
  100.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  101.   -- -- -- == -- == == == -- -- -- -- --
  102.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  103.  
  104.   Commands leading to the command that caused the error were:
  105.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  106.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  107.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:52:01.082  READ DMA EXT
  108.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.081  IDENTIFY DEVICE
  109.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:52:01.081  SET FEATURES [Set transfer mode]
  110.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:52:01.025  IDENTIFY DEVICE
  111.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  112.  
  113. Error 4000 [19] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  114.   When the command that caused the error occurred, the device was active or idle.
  115.  
  116.   After command completion occurred, registers were:
  117.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  118.   -- -- -- == -- == == == -- -- -- -- --
  119.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  120.  
  121.   Commands leading to the command that caused the error were:
  122.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  123.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  124.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  125.   25 00 00 00 08 00 00 38 58 b1 28 e0 00     11:51:57.672  READ DMA EXT
  126.   25 00 00 00 08 00 00 38 58 b1 20 e0 00     11:51:57.630  READ DMA EXT
  127.   25 00 00 00 08 00 00 38 58 b1 18 e0 00     11:51:57.608  READ DMA EXT
  128.   25 00 00 00 08 00 00 38 58 b1 10 e0 00     11:51:57.571  READ DMA EXT
  129.  
  130. Error 3999 [18] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  131.   When the command that caused the error occurred, the device was active or idle.
  132.  
  133.   After command completion occurred, registers were:
  134.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  135.   -- -- -- == -- == == == -- -- -- -- --
  136.   40 -- 51 00 00 00 00 38 58 b1 30 00 00  Error: UNC at LBA = 0x3858b130 = 945336624
  137.  
  138.   Commands leading to the command that caused the error were:
  139.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  140.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  141.   25 00 00 00 08 00 00 38 58 b1 30 e0 00     11:51:57.714  READ DMA EXT
  142.   25 00 00 00 08 00 00 38 58 b1 28 e0 00     11:51:57.672  READ DMA EXT
  143.   25 00 00 00 08 00 00 38 58 b1 20 e0 00     11:51:57.630  READ DMA EXT
  144.   25 00 00 00 08 00 00 38 58 b1 18 e0 00     11:51:57.608  READ DMA EXT
  145.   25 00 00 00 08 00 00 38 58 b1 10 e0 00     11:51:57.571  READ DMA EXT
  146.  
  147. Error 3998 [17] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  148.   When the command that caused the error occurred, the device was active or idle.
  149.  
  150.   After command completion occurred, registers were:
  151.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  152.   -- -- -- == -- == == == -- -- -- -- --
  153.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  154.  
  155.   Commands leading to the command that caused the error were:
  156.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  157.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  158.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:23.277  READ DMA EXT
  159.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:23.265  IDENTIFY DEVICE
  160.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:51:23.171  SET FEATURES [Set transfer mode]
  161.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:19.668  IDENTIFY DEVICE
  162.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  163.  
  164. Error 3997 [16] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  165.   When the command that caused the error occurred, the device was active or idle.
  166.  
  167.   After command completion occurred, registers were:
  168.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  169.   -- -- -- == -- == == == -- -- -- -- --
  170.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  171.  
  172.   Commands leading to the command that caused the error were:
  173.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  174.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  175.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:23.277  READ DMA EXT
  176.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:23.265  IDENTIFY DEVICE
  177.   ef 00 03 00 42 00 00 00 00 00 00 a0 00     11:51:23.171  SET FEATURES [Set transfer mode]
  178.   ec 00 00 00 00 00 00 00 00 00 00 a0 00     11:51:19.668  IDENTIFY DEVICE
  179.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  180.  
  181. Error 3996 [15] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  182.   When the command that caused the error occurred, the device was active or idle.
  183.  
  184.   After command completion occurred, registers were:
  185.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  186.   -- -- -- == -- == == == -- -- -- -- --
  187.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  188.  
  189.   Commands leading to the command that caused the error were:
  190.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  191.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  192.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  193.   25 00 00 00 08 00 00 38 58 8f 68 e0 00     11:51:15.386  READ DMA EXT
  194.   25 00 00 00 08 00 00 38 58 8f 60 e0 00     11:51:15.356  READ DMA EXT
  195.   25 00 00 00 08 00 00 38 58 8f 58 e0 00     11:51:15.355  READ DMA EXT
  196.   25 00 00 00 08 00 00 38 58 8f 50 e0 00     11:51:15.354  READ DMA EXT
  197.  
  198. Error 3995 [14] occurred at disk power-on lifetime: 15729 hours (655 days + 9 hours)
  199.   When the command that caused the error occurred, the device was active or idle.
  200.  
  201.   After command completion occurred, registers were:
  202.   ER -- ST COUNT  LBA_48  LH LM LL DV DC
  203.   -- -- -- == -- == == == -- -- -- -- --
  204.   40 -- 51 00 00 00 00 38 58 8f 70 00 00  Error: UNC at LBA = 0x38588f70 = 945327984
  205.  
  206.   Commands leading to the command that caused the error were:
  207.   CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  208.   -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  209.   25 00 00 00 08 00 00 38 58 8f 70 e0 00     11:51:16.045  READ DMA EXT
  210.   25 00 00 00 08 00 00 38 58 8f 68 e0 00     11:51:15.386  READ DMA EXT
  211.   25 00 00 00 08 00 00 38 58 8f 60 e0 00     11:51:15.356  READ DMA EXT
  212.   25 00 00 00 08 00 00 38 58 8f 58 e0 00     11:51:15.355  READ DMA EXT
  213.   25 00 00 00 08 00 00 38 58 8f 50 e0 00     11:51:15.354  READ DMA EXT
  214.  
  215. SMART Extended Self-test Log Version: 1 (1 sectors)
  216. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  217. # 1  Extended captive    Interrupted (host reset)      90%      6052         -
  218.  
  219. Selective Self-tests/Logging not supported
  220.  
  221. SCT Status Version:                  3
  222. SCT Version (vendor specific):       522 (0x020a)
  223. SCT Support Level:                   1
  224. Device State:                        Active (0)
  225. Current Temperature:                    47 Celsius
  226. Power Cycle Min/Max Temperature:     20/48 Celsius
  227. Lifetime    Min/Max Temperature:     12/63 Celsius
  228. Under/Over Temperature Limit Count:   0/0
  229.  
  230. SCT Data Table command not supported
  231.  
  232. SCT Error Recovery Control command not supported
  233.  
  234. Device Statistics (GP/SMART Log 0x04) not supported
  235.  
  236. Pending Defects log (GP Log 0x0c) not supported
  237.  
  238. SATA Phy Event Counters (GP Log 0x11)
  239. ID      Size     Value  Description
  240. 0x000a  2          111  Device-to-host register FISes sent due to a COMRESET
  241. 0x0001  2            0  Command failed due to ICRC error
  242. 0x0003  2            0  R_ERR response for device-to-host data FIS
  243. 0x0004  2            0  R_ERR response for host-to-device data FIS
  244. 0x0006  2            0  R_ERR response for device-to-host non-data FIS
  245. 0x0007  2            0  R_ERR response for host-to-device non-data FIS
  246.  
  247.  
captcha