From Buff Goose, 1 Week ago, written in Plain Text.
  1. [    0.000000] Booting Linux on physical CPU 0x0
  2. [    0.000000] Linux version 4.19.66 (jenkins@leda) (gcc version 8.3.0 (GCC)) #1 SMP Mon Sep 2 19:20:13 EDT 2019
  3. [    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  4. [    0.000000] CPU: div instructions available: patching division code
  5. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
  7. [    0.000000] Memory policy: Data cache writealloc
  8. [    0.000000] cma: Reserved 256 MiB at 0x000000001bc00000
  9. [    0.000000] On node 0 totalpages: 950272
  10. [    0.000000]   DMA zone: 1584 pages used for memmap
  11. [    0.000000]   DMA zone: 0 pages reserved
  12. [    0.000000]   DMA zone: 180224 pages, LIFO batch:63
  13. [    0.000000]   HighMem zone: 770048 pages, LIFO batch:63
  14. [    0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d4 with crng_init=0
  15. [    0.000000] percpu: Embedded 18 pages/cpu s41676 r8192 d23860 u73728
  16. [    0.000000] pcpu-alloc: s41676 r8192 d23860 u73728 alloc=18*4096
  17. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  18. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 948688
  19. [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:3840x2160@60 smsc95xx.macaddr=DC:A6:32:1C:3D:6C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  boot=UUID=0309-2816 disk=UUID=cde62edc-4372-409a-a45e-3ce8ca97d0d8 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
  20. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  21. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [    0.000000] Memory: 3481976K/3801088K available (10240K kernel code, 753K rwdata, 2232K rodata, 6144K init, 557K bss, 56968K reserved, 262144K cma-reserved, 3080192K highmem)
  23. [    0.000000] Virtual kernel memory layout:
  24. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  25. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  26. [    0.000000]     vmalloc : 0xec800000 - 0xff800000   ( 304 MB)
  27. [    0.000000]     lowmem  : 0xc0000000 - 0xec000000   ( 704 MB)
  28. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  29. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  30. [    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
  31. [    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (6144 kB)
  32. [    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 754 kB)
  33. [    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 558 kB)
  34. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  35. [    0.000000] ftrace: allocating 32491 entries in 96 pages
  36. [    0.000000] rcu: Hierarchical RCU implementation.
  37. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  38. [    0.000000] GIC: Using split EOI/Deactivate mode
  39. [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  40. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  41. [    0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  42. [    0.000016] Switching to timer-based delay loop, resolution 18ns
  43. [    0.000255] Console: colour dummy device 80x30
  44. [    0.000286] console [tty0] enabled
  45. [    0.000336] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)
  46. [    0.000365] pid_max: default: 32768 minimum: 301
  47. [    0.000553] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  48. [    0.000575] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. [    0.001325] CPU: Testing write buffer coherency: ok
  50. [    0.001826] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  51. [    0.002626] Setting up static identity map for 0x200000 - 0x20003c
  52. [    0.002823] rcu: Hierarchical SRCU implementation.
  53. [    0.005373] smp: Bringing up secondary CPUs ...
  54. [    0.006385] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  55. [    0.007580] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  56. [    0.008692] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  57. [    0.008860] smp: Brought up 1 node, 4 CPUs
  58. [    0.008876] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  59. [    0.008889] CPU: All CPU(s) started in HYP mode.
  60. [    0.008901] CPU: Virtualization extensions available.
  61. [    0.009652] devtmpfs: initialized
  62. [    0.020621] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  63. [    0.020845] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  64. [    0.020872] futex hash table entries: 1024 (order: 4, 65536 bytes)
  65. [    0.027378] pinctrl core: initialized pinctrl subsystem
  66. [    0.028364] NET: Registered protocol family 16
  67. [    0.032027] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  68. [    0.033049] cpuidle: using governor ladder
  69. [    0.033098] cpuidle: using governor menu
  70. [    0.033598] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  71. [    0.033611] hw-breakpoint: maximum watchpoint size is 8 bytes.
  72. [    0.033832] Serial: AMBA PL011 UART driver
  73. [    0.038361] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  74. [    0.082053] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  75. [    0.085352] vgaarb: loaded
  76. [    0.085687] SCSI subsystem initialized
  77. [    0.085892] usbcore: registered new interface driver usbfs
  78. [    0.085948] usbcore: registered new interface driver hub
  79. [    0.086033] usbcore: registered new device driver usb
  80. [    0.091375] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-09 17:25, variant start_x
  81. [    0.093687] raspberrypi-firmware soc:firmware: Firmware hash is 9f8431fb7839c7f00f52b81f5822ddab2b31d0db
  82. [    0.097454] Advanced Linux Sound Architecture Driver Initialized.
  83. [    0.098473] clocksource: Switched to clocksource arch_sys_counter
  84. [    0.185839] FS-Cache: Loaded
  85. [    0.196202] NET: Registered protocol family 2
  86. [    0.196776] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  87. [    0.196806] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  88. [    0.196868] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  89. [    0.196933] TCP: Hash tables configured (established 8192 bind 8192)
  90. [    0.197068] UDP hash table entries: 512 (order: 2, 16384 bytes)
  91. [    0.197100] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  92. [    0.197330] NET: Registered protocol family 1
  93. [    0.197984] RPC: Registered named UNIX socket transport module.
  94. [    0.197997] RPC: Registered udp transport module.
  95. [    0.198010] RPC: Registered tcp transport module.
  96. [    0.198023] RPC: Registered tcp NFSv4.1 backchannel transport module.
  97. [    0.198042] PCI: CLS 0 bytes, default 64
  98. [    0.222131] Initialise system trusted keyrings
  99. [    0.222325] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  100. [    0.231693] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  101. [    0.232445] FS-Cache: Netfs 'nfs' registered for caching
  102. [    0.233199] NFS: Registering the id_resolver key type
  103. [    0.233245] Key type id_resolver registered
  104. [    0.233258] Key type id_legacy registered
  105. [    0.233281] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  106. [    0.233766] FS-Cache: Netfs 'cifs' registered for caching
  107. [    0.241319] Key type asymmetric registered
  108. [    0.241334] Asymmetric key parser 'x509' registered
  109. [    0.241523] bounce: pool size: 64 pages
  110. [    0.241585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  111. [    0.241601] io scheduler noop registered (default)
  112. [    0.241614] io scheduler deadline registered
  113. [    0.241761] io scheduler cfq registered
  114. [    0.241775] io scheduler mq-deadline registered
  115. [    0.241833] io scheduler kyber registered
  116. [    0.241980] io scheduler bfq registered
  117. [    0.267961] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
  118. [    0.267986] brcm-pcie fd500000.pcie: could not get clock
  119. [    0.268078] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  120. [    0.268132] brcm-pcie fd500000.pcie:   MEM 0x600000000..0x603ffffff -> 0xf8000000
  121. [    0.318513] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
  122. [    0.318771] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  123. [    0.318790] pci_bus 0000:00: root bus resource [bus 00-01]
  124. [    0.318809] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  125. [    0.318877] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  126. [    0.319100] pci 0000:00:00.0: PME# supported from D0 D3hot
  127. [    0.321893] PCI: bus0: Fast back to back transfers disabled
  128. [    0.321915] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  129. [    0.322123] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  130. [    0.322207] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  131. [    0.322454] pci 0000:01:00.0: PME# supported from D0 D3cold
  132. [    0.325080] PCI: bus1: Fast back to back transfers disabled
  133. [    0.325099] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
  134. [    0.325184] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  135. [    0.325207] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  136. [    0.325247] pci 0000:00:00.0: PCI bridge to [bus 01]
  137. [    0.325271] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
  138. [    0.325534] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
  139. [    0.325774] pcieport 0000:00:00.0: Signaling PME with IRQ 55
  140. [    0.325983] pcieport 0000:00:00.0: AER enabled with IRQ 55
  141. [    0.326175] pci 0000:01:00.0: enabling device (0140 -> 0142)
  142. [    0.330623] iproc-rng200 fe104000.rng: hwrng registered
  143. [    0.330922] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  144. [    0.331578] vc-sm: Videocore shared memory driver
  145. [    0.338012] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5f040)
  146. [    0.338644] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
  147. [    0.338659] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  148. [    0.338671] [drm] No driver support for vblank timestamp query.
  149. [    0.338683] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
  150. [    0.703112] Console: switching to colour frame buffer device 480x135
  151. [    0.786488] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
  152. [    0.798907] brd: module loaded
  153. [    0.799050] loop: module loaded
  154. [    0.820873] usbcore: registered new interface driver rtsx_usb
  155. [    0.821981] Loading iSCSI transport class v2.0-870.
  156. [    0.822420] iscsi: registered transport (tcp)
  157. [    0.824091] libphy: Fixed MDIO Bus: probed
  158. [    0.824130] tun: Universal TUN/TAP device driver, 1.6
  159. [    0.824899] bcmgenet fd580000.genet: failed to get enet clock
  160. [    0.824919] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
  161. [    0.824942] bcmgenet fd580000.genet: failed to get enet-wol clock
  162. [    0.824962] bcmgenet fd580000.genet: failed to get enet-eee clock
  163. [    0.824990] bcmgenet: Skipping UMAC reset
  164. [    0.825445] unimac-mdio unimac-mdio.-19: DMA mask not set
  165. [    0.838527] libphy: bcmgenet MII bus: probed
  166. [    0.866021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
  167. [    0.867011] usbcore: registered new interface driver lan78xx
  168. [    0.867065] usbcore: registered new interface driver dm9601
  169. [    0.867123] usbcore: registered new interface driver smsc95xx
  170. [    0.867417] xhci_hcd 0000:01:00.0: xHCI Host Controller
  171. [    0.867452] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  172. [    0.870175] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
  173. [    0.870354] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 56
  174. [    0.871105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  175. [    0.871123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  176. [    0.871138] usb usb1: Product: xHCI Host Controller
  177. [    0.871154] usb usb1: Manufacturer: Linux 4.19.66 xhci-hcd
  178. [    0.871168] usb usb1: SerialNumber: 0000:01:00.0
  179. [    0.871750] hub 1-0:1.0: USB hub found
  180. [    0.871874] hub 1-0:1.0: 1 port detected
  181. [    0.872352] xhci_hcd 0000:01:00.0: xHCI Host Controller
  182. [    0.872377] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  183. [    0.872401] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  184. [    0.872822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  185. [    0.872839] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  186. [    0.872854] usb usb2: Product: xHCI Host Controller
  187. [    0.872869] usb usb2: Manufacturer: Linux 4.19.66 xhci-hcd
  188. [    0.872883] usb usb2: SerialNumber: 0000:01:00.0
  189. [    0.873460] hub 2-0:1.0: USB hub found
  190. [    0.873527] hub 2-0:1.0: 4 ports detected
  191. [    0.874874] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  192. [    0.900515] dwc_otg fe980000.usb: base=(ptrval)
  193. [    1.100808] Core Release: 2.80a
  194. [    1.100824] Setting default values for core params
  195. [    1.100852] Finished setting default values for core params
  196. [    1.301290] Using Buffer DMA mode
  197. [    1.301304] Periodic Transfer Interrupt Enhancement - disabled
  198. [    1.301316] Multiprocessor Interrupt Enhancement - disabled
  199. [    1.301330] OTG VER PARAM: 0, OTG VER FLAG: 0
  200. [    1.301397] Dedicated Tx FIFOs mode
  201. [    1.301959] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = dbd34000 dma = 0x00000000dbd34000 len=9024
  202. [    1.301986] FIQ FSM acceleration enabled for :
  203. [    1.301986] Non-periodic Split Transactions
  204. [    1.301986] Periodic Split Transactions
  205. [    1.301986] High-Speed Isochronous Endpoints
  206. [    1.301986] Interrupt/Control Split Transaction hack enabled
  207. [    1.302001] dwc_otg: Microframe scheduler enabled
  208. [    1.302168] WARN::hcd_init_fiq:457: FIQ on core 1
  209. [    1.302183] WARN::hcd_init_fiq:458: FIQ ASM at c08a58a8 length 36
  210. [    1.302200] WARN::hcd_init_fiq:497: MPHI regs_base at ec810200
  211. [    1.302219] dwc_otg fe980000.usb: DWC OTG Controller
  212. [    1.302254] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
  213. [    1.302297] dwc_otg fe980000.usb: irq 37, io mem 0x00000000
  214. [    1.302349] Init: Port Power? op_state=1
  215. [    1.302362] Init: Power Port (0)
  216. [    1.302703] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  217. [    1.302720] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  218. [    1.302737] usb usb3: Product: DWC OTG Controller
  219. [    1.302752] usb usb3: Manufacturer: Linux 4.19.66 dwc_otg_hcd
  220. [    1.302766] usb usb3: SerialNumber: fe980000.usb
  221. [    1.303349] hub 3-0:1.0: USB hub found
  222. [    1.303412] hub 3-0:1.0: 1 port detected
  223. [    1.304151] dwc_otg: FIQ enabled
  224. [    1.304164] dwc_otg: NAK holdoff enabled
  225. [    1.304177] dwc_otg: FIQ split-transaction FSM enabled
  226. [    1.304194] Module dwc_common_port init
  227. [    1.304457] usbcore: registered new interface driver uas
  228. [    1.304592] usbcore: registered new interface driver usb-storage
  229. [    1.304782] mousedev: PS/2 mouse device common for all mice
  230. [    1.305234] i2c /dev entries driver
  231. [    1.307898] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  232. [    1.308092] bcm2835-cpufreq: min=600000 max=1500000
  233. [    1.308919] sdhci: Secure Digital Host Controller Interface driver
  234. [    1.308931] sdhci: Copyright(c) Pierre Ossman
  235. [    1.309470] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  236. [    1.310012] sdhci-pltfm: SDHCI platform and OF driver helper
  237. [    1.314135] ledtrig-cpu: registered to indicate activity on CPUs
  238. [    1.314204] hidraw: raw HID events driver (C) Jiri Kosina
  239. [    1.315451] usbcore: registered new interface driver usbhid
  240. [    1.315456] usbhid: USB HID core driver
  241. [    1.315907] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  242. [    1.317105] [vc_sm_connected_init]: start
  243. [    1.324102] [vc_sm_connected_init]: end - returning 0
  244. [    1.324909] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  245. [    1.324929] [vc_sm_connected_init]: start
  246. [    1.325405] [vc_sm_connected_init]: installed successfully
  247. [    1.327359] NET: Registered protocol family 10
  248. [    1.328619] Segment Routing with IPv6
  249. [    1.328707] NET: Registered protocol family 17
  250. [    1.328827] Key type dns_resolver registered
  251. [    1.329104] Registering SWP/SWPB emulation handler
  252. [    1.329743] Loading compiled-in X.509 certificates
  253. [    1.339158] uart-pl011 fe201000.serial: cts_event_workaround enabled
  254. [    1.339232] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
  255. [    1.342544] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  256. [    1.342906] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
  257. [    1.343309] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  258. [    1.343315] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  259. [    1.369571] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
  260. [    1.388660] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  261. [    1.390194] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  262. [    1.391859] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  263. [    1.394845] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  264. [    1.396517] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  265. [    1.402307] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  266. [    1.409557] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  267. [    1.411704] console [netcon0] enabled
  268. [    1.411709] netconsole: network logging started
  269. [    1.411715] of_cfs_init
  270. [    1.411727] of_cfs_init: OK
  271. [    1.411915] ALSA device list:
  272. [    1.411921]   No soundcards found.
  273. [    1.419311] Freeing unused kernel memory: 6144K
  274. [    1.419445] Run /init as init process
  275. [    1.424674] random: fast init done
  276. [    1.425162] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  277. [    1.465929] mmc1: new high speed SDIO card at address 0001
  278. [    1.475281] mmc0: new ultra high speed SDR25 SDXC card at address 1388
  279. [    1.476184] mmcblk0: mmc0:1388 USD00 58.9 GiB
  280. [    1.477336]  mmcblk0: p1 p2
  281. [    1.569632] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
  282. [    1.569642] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  283. [    1.569648] usb 1-1: Product: USB2.0 Hub
  284. [    1.570881] hub 1-1:1.0: USB hub found
  285. [    1.571170] hub 1-1:1.0: 4 ports detected
  286. [    2.880757] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  287. [   12.604162] systemd[1]: System time before build time, advancing clock.
  288. [   12.610931] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  289. [   12.611240] systemd[1]: Detected architecture arm.
  290. [   12.614402] systemd[1]: Set hostname to <LibreELEC>.
  291. [   12.615992] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
  292. [   12.692882] random: systemd: uninitialized urandom read (16 bytes read)
  293. [   12.696480] systemd[1]: Starting Show Version...
  294. [   12.696698] random: systemd: uninitialized urandom read (16 bytes read)
  295. [   12.696963] systemd[1]: Listening on initctl Compatibility Named Pipe.
  296. [   12.697036] random: systemd: uninitialized urandom read (16 bytes read)
  297. [   12.697229] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  298. [   12.697803] systemd[1]: Listening on Journal Socket.
  299. [   12.700602] systemd[1]: Mounting POSIX Message Queue File System...
  300. [   12.701580] systemd[1]: Created slice User and Session Slice.
  301. [   12.776318] kernel-overlays-setup: setup base modules
  302. [   12.826296] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.66
  303. [   12.858061] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  304. [   12.858194] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  305. [   12.859100] kernel-overlays-setup: done
  306. [   13.015076] systemd-journald[214]: Received request to flush runtime journal from PID 1
  307. [   13.280027] random: crng init done
  308. [   13.280036] random: 7 urandom warning(s) missed due to ratelimiting
  309. [   14.005738] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
  310. [   14.006631] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
  311. [   14.006934] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
  312. [   14.007198] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
  313. [   14.021581] videodev: Linux video capture interface: v2.00
  314. [   14.050893] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  315. [   14.110574] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  316. [   14.121762] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  317. [   14.168446] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  318. [   14.172301] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  319. [   14.172311] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  320. [   14.184910] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  321. [   14.184920] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  322. [   14.204243] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  323. [   14.204254] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  324. [   14.245186] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  325. [   14.286928] brcmfmac: F1 signature read @0x18000000=0x15264345
  326. [   14.299372] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  327. [   14.306047] usbcore: registered new interface driver brcmfmac
  328. [   14.465922] bcmgenet: Skipping UMAC reset
  329. [   14.532154] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
  330. [   14.532650] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  331. [   14.548195] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  332. [   14.564398] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  333. [   14.747988] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  334. [   14.748008] brcmfmac: power management disabled
  335. [   15.545332] bcmgenet fd580000.genet eth0: Link is Down
  336. [   15.668215] uart-pl011 fe201000.serial: no DMA platform data
  337. [   22.269085] Bluetooth: Core ver 2.22
  338. [   22.269164] NET: Registered protocol family 31
  339. [   22.269178] Bluetooth: HCI device and connection manager initialized
  340. [   22.269202] Bluetooth: HCI socket layer initialized
  341. [   22.269222] Bluetooth: L2CAP socket layer initialized
  342. [   22.269273] Bluetooth: SCO socket layer initialized
  343. [   22.272644] Bluetooth: HCI UART driver ver 2.3
  344. [   22.272662] Bluetooth: HCI UART protocol H4 registered
  345. [   22.272754] Bluetooth: HCI UART protocol Three-wire (H5) registered
  346. [   22.273072] Bluetooth: HCI UART protocol Broadcom registered
  347. [  386.329285] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  348.  
captcha