From Shariff, 1 Year ago, written in Plain Text.
  1. [    3.240965] libphy: lan78xx-mdiobus: probed
  2. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  3. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  4. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  5. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  6. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  7. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  8. [    4.443078] usbcore: registered new interface driver brcmfmac
  9. [    4.689993] random: crng init done
  10. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  11. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  12. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  13. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  14. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  15. [    5.924523] brcmfmac: power management disabled
  16. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  17. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  18. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  19. [   12.020101] Bluetooth: Core ver 2.22
  20. [   12.020160] NET: Registered protocol family 31
  21. [   12.020163] Bluetooth: HCI device and connection manager initialized
  22. [   12.020178] Bluetooth: HCI socket layer initialized
  23. [   12.020185] Bluetooth: L2CAP socket layer initialized
  24. [   12.020206] Bluetooth: SCO socket layer initialized
  25. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  26. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  27. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  28. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  29. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  30. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  31. [   12.347349] Bluetooth: BNEP socket layer initialized
  32. kevin@darach:/dev $ clear
  33. kevin@darach:/dev $ dmesg
  34. [    0.000000] Booting Linux on physical CPU 0x0
  35. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  36. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  37. [    0.000000] CPU: div instructions available: patching division code
  38. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  39. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  40. [    0.000000] Memory policy: Data cache writealloc
  41. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  42. [    0.000000] On node 0 totalpages: 242688
  43. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  44. [    0.000000]   Normal zone: 2133 pages used for memmap
  45. [    0.000000]   Normal zone: 0 pages reserved
  46. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  47. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  48. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  49. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  50. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  51. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  52. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  53. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  54. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  55. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  56. [    0.000000] Virtual kernel memory layout:
  57.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  58.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  59.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  60.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  61.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  62.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  63.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  64.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  65.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  66. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  67. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  68. [    0.000000] Hierarchical RCU implementation.
  69. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  70. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  71. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  72. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  73. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  74. [    0.000274] Console: colour dummy device 80x30
  75. [    0.000806] console [tty1] enabled
  76. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  77. [    0.000883] pid_max: default: 32768 minimum: 301
  78. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  79. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  80. [    0.002201] Disabling memory control group subsystem
  81. [    0.002294] CPU: Testing write buffer coherency: ok
  82. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  83. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  84. [    0.003272] Hierarchical SRCU implementation.
  85. [    0.003964] smp: Bringing up secondary CPUs ...
  86. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  87. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  88. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  89. [    0.006513] smp: Brought up 1 node, 4 CPUs
  90. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  91. [    0.006606] CPU: All CPU(s) started in HYP mode.
  92. [    0.006624] CPU: Virtualization extensions available.
  93. [    0.007517] devtmpfs: initialized
  94. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  95. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  96. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  97. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  98. [    0.019239] pinctrl core: initialized pinctrl subsystem
  99. [    0.020035] NET: Registered protocol family 16
  100. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  101. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  102. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  103. [    0.027705] Serial: AMBA PL011 UART driver
  104. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  105. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  106. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  107. [    0.062999] SCSI subsystem initialized
  108. [    0.063243] usbcore: registered new interface driver usbfs
  109. [    0.063313] usbcore: registered new interface driver hub
  110. [    0.063412] usbcore: registered new device driver usb
  111. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  112. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  113. [    0.147950] VFS: Disk quotas dquot_6.6.0
  114. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  115. [    0.148263] FS-Cache: Loaded
  116. [    0.148478] CacheFiles: Loaded
  117. [    0.157380] NET: Registered protocol family 2
  118. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  119. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  120. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  121. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  122. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  123. [    0.158896] NET: Registered protocol family 1
  124. [    0.159368] RPC: Registered named UNIX socket transport module.
  125. [    0.159391] RPC: Registered udp transport module.
  126. [    0.159410] RPC: Registered tcp transport module.
  127. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  128. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  129. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  130. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  131. [    0.172478] NFS: Registering the id_resolver key type
  132. [    0.172520] Key type id_resolver registered
  133. [    0.172540] Key type id_legacy registered
  134. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  135. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  136. [    0.174673] io scheduler noop registered
  137. [    0.174695] io scheduler deadline registered (default)
  138. [    0.174990] io scheduler cfq registered
  139. [    0.175012] io scheduler mq-deadline registered
  140. [    0.175031] io scheduler kyber registered
  141. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  142. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  143. [    0.227300] Console: switching to colour frame buffer device 228x61
  144. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  145. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  146. [    0.258635] vc-sm: Videocore shared memory driver
  147. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  148. [    0.269016] brd: module loaded
  149. [    0.278107] loop: module loaded
  150. [    0.278242] Loading iSCSI transport class v2.0-870.
  151. [    0.279078] libphy: Fixed MDIO Bus: probed
  152. [    0.279307] usbcore: registered new interface driver lan78xx
  153. [    0.279522] usbcore: registered new interface driver smsc95xx
  154. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  155. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  156. [    0.508094] Core Release: 2.80a
  157. [    0.508197] Setting default values for core params
  158. [    0.508357] Finished setting default values for core params
  159. [    0.708753] Using Buffer DMA mode
  160. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  161. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  162. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  163. [    0.709303] Dedicated Tx FIFOs mode
  164. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  165. [    0.710130] FIQ FSM acceleration enabled for :
  166.                Non-periodic Split Transactions
  167.                Periodic Split Transactions
  168.                High-Speed Isochronous Endpoints
  169.                Interrupt/Control Split Transaction hack enabled
  170. [    0.717507] dwc_otg: Microframe scheduler enabled
  171. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  172. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  173. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  174. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  175. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  176. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  177. [    0.758539] Init: Port Power? op_state=1
  178. [    0.765249] Init: Power Port (0)
  179. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  180. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  181. [    0.785776] usb usb1: Product: DWC OTG Controller
  182. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  183. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  184. [    0.806865] hub 1-0:1.0: USB hub found
  185. [    0.813545] hub 1-0:1.0: 1 port detected
  186. [    0.820654] dwc_otg: FIQ enabled
  187. [    0.820659] dwc_otg: NAK holdoff enabled
  188. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  189. [    0.820673] Module dwc_common_port init
  190. [    0.820914] usbcore: registered new interface driver usb-storage
  191. [    0.827718] mousedev: PS/2 mouse device common for all mice
  192. [    0.834488] IR NEC protocol handler initialized
  193. [    0.841176] IR RC5(x/sz) protocol handler initialized
  194. [    0.847845] IR RC6 protocol handler initialized
  195. [    0.854476] IR JVC protocol handler initialized
  196. [    0.860890] IR Sony protocol handler initialized
  197. [    0.867378] IR SANYO protocol handler initialized
  198. [    0.873888] IR Sharp protocol handler initialized
  199. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  200. [    0.886812] IR XMP protocol handler initialized
  201. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  202. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  203. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  204. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  205. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  206. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  207. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  208. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  209. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  210. [    0.957805] usbcore: registered new interface driver usbhid
  211. [    0.964417] usbhid: USB HID core driver
  212. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  213. [    0.979914] [vc_sm_connected_init]: start
  214. [    0.990138] [vc_sm_connected_init]: end - returning 0
  215. [    0.997465] Initializing XFRM netlink socket
  216. [    1.004189] NET: Registered protocol family 17
  217. [    1.010919] Key type dns_resolver registered
  218. [    1.018033] Registering SWP/SWPB emulation handler
  219. [    1.025266] registered taskstats version 1
  220. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  221. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  222. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  223. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  224. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  225. [    1.126990] random: fast init done
  226. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  227. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  228. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  229. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  230. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  231. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  232. [    1.228913] of_cfs_init
  233. [    1.235507] of_cfs_init: OK
  234. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  235. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  236. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  237. [    1.296877] mmc1: new high speed SDIO card at address 0001
  238. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  239. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  240. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  241. [    1.390149]  mmcblk0: p1 p2
  242. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  243. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  244. [    1.448622] devtmpfs: mounted
  245. [    1.458366] Freeing unused kernel memory: 1024K
  246. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  247. [    1.481908] NOHZ: local_softirq_pending 40
  248. [    1.488516] NOHZ: local_softirq_pending 40
  249. [    1.489639] NOHZ: local_softirq_pending 40
  250. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  251. [    1.516700] hub 1-1:1.0: USB hub found
  252. [    1.521779] NOHZ: local_softirq_pending 40
  253. [    1.530176] NOHZ: local_softirq_pending 40
  254. [    1.531774] NOHZ: local_softirq_pending 40
  255. [    1.544356] hub 1-1:1.0: 4 ports detected
  256. [    1.582047] NOHZ: local_softirq_pending 40
  257. [    1.588672] NOHZ: local_softirq_pending 40
  258. [    1.595057] NOHZ: local_softirq_pending 40
  259. [    1.601388] NOHZ: local_softirq_pending 40
  260. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  261. [    1.924382] systemd[1]: System time before build time, advancing clock.
  262. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  263. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  264. [    2.015369] hub 1-1.1:1.0: USB hub found
  265. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  266. [    2.052192] NET: Registered protocol family 10
  267. [    2.059497] Segment Routing with IPv6
  268. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  269. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  270. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  271. [    2.121472] systemd[1]: Detected architecture arm.
  272. [    2.156106] systemd[1]: Set hostname to <darach>.
  273. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  274. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  275. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  276. [    2.622376] systemd[1]: Listening on udev Control Socket.
  277. [    2.637651] systemd[1]: Listening on Journal Socket.
  278. [    2.652846] systemd[1]: Created slice User and Session Slice.
  279. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  280. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  281. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  282. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  283. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  284. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  285. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  286. [    3.240965] libphy: lan78xx-mdiobus: probed
  287. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  288. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  289. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  290. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  291. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  292. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  293. [    4.443078] usbcore: registered new interface driver brcmfmac
  294. [    4.689993] random: crng init done
  295. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  296. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  297. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  298. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  299. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  300. [    5.924523] brcmfmac: power management disabled
  301. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  302. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  303. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  304. [   12.020101] Bluetooth: Core ver 2.22
  305. [   12.020160] NET: Registered protocol family 31
  306. [   12.020163] Bluetooth: HCI device and connection manager initialized
  307. [   12.020178] Bluetooth: HCI socket layer initialized
  308. [   12.020185] Bluetooth: L2CAP socket layer initialized
  309. [   12.020206] Bluetooth: SCO socket layer initialized
  310. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  311. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  312. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  313. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  314. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  315. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  316. [   12.347349] Bluetooth: BNEP socket layer initialized
  317. kevin@darach:/dev $ dmesg /q phrik ptpb
  318.  
  319. Usage:
  320.  dmesg [options]
  321.  
  322. Display or control the kernel ring buffer.
  323.  
  324. Options:
  325.  -C, --clear                 clear the kernel ring buffer
  326.  -c, --read-clear            read and clear all messages
  327.  -D, --console-off           disable printing messages to console
  328.  -E, --console-on            enable printing messages to console
  329.  -F, --file <file>           use the file instead of the kernel log buffer
  330.  -f, --facility <list>       restrict output to defined facilities
  331.  -H, --human                 human readable output
  332.  -k, --kernel                display kernel messages
  333.  -L, --color[=<when>]        colorize messages (auto, always or never)
  334.                                colors are enabled by default
  335.  -l, --level <list>          restrict output to defined levels
  336.  -n, --console-level <level> set level of messages printed to console
  337.  -P, --nopager               do not pipe output into a pager
  338.  -r, --raw                   print the raw message buffer
  339.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  340.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  341.  -u, --userspace             display userspace messages
  342.  -w, --follow                wait for new messages
  343.  -x, --decode                decode facility and level to readable string
  344.  -d, --show-delta            show time delta between printed messages
  345.  -e, --reltime               show local time and time delta in readable format
  346.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  347.  -t, --notime                don't show any timestamp with messages
  348.      --time-format <format>  show timestamp using the given format:
  349.                                [delta|reltime|ctime|notime|iso]
  350. Suspending/resume will make ctime and iso timestamps inaccurate.
  351.  
  352.  -h, --help     display this help and exit
  353.  -V, --version  output version information and exit
  354.  
  355. Supported log facilities:
  356.     kern - kernel messages
  357.     user - random user-level messages
  358.     mail - mail system
  359.   daemon - system daemons
  360.     auth - security/authorization messages
  361.   syslog - messages generated internally by syslogd
  362.      lpr - line printer subsystem
  363.     news - network news subsystem
  364.  
  365. Supported log levels (priorities):
  366.    emerg - system is unusable
  367.    alert - action must be taken immediately
  368.     crit - critical conditions
  369.      err - error conditions
  370.     warn - warning conditions
  371.   notice - normal but significant condition
  372.     info - informational
  373.    debug - debug-level messages
  374.  
  375.  
  376. For more details see dmesg(1).
  377. kevin@darach:/dev $ dmesg > message.txt
  378. -bash: message.txt: Toegang geweigerd
  379. kevin@darach:/dev $ cd
  380. kevin@darach:~ $ dmesg > message.txt
  381. kevin@darach:~ $ nano message.txt
  382. kevin@darach:~ $ vi message.txt
  383. [    0.000000] Booting Linux on physical CPU 0x0
  384. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  385. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  386. [    0.000000] CPU: div instructions available: patching division code
  387. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  388. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  389. [    0.000000] Memory policy: Data cache writealloc
  390. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  391. [    0.000000] On node 0 totalpages: 242688
  392. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  393. [    0.000000]   Normal zone: 2133 pages used for memmap
  394. [    0.000000]   Normal zone: 0 pages reserved
  395. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  396. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  397. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  398. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  399. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  400. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  401. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  402. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  403. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  404. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  405. [    0.000000] Virtual kernel memory layout:
  406.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  407.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  408.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  409.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  410.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  411.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  412.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  413.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  414.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  415. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  416. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  417. [    3.240965] libphy: lan78xx-mdiobus: probed
  418. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  419. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  420. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  421. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  422. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  423. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  424. [    4.443078] usbcore: registered new interface driver brcmfmac
  425. [    4.689993] random: crng init done
  426. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  427. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  428. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  429. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  430. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  431. [    5.924523] brcmfmac: power management disabled
  432. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  433. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  434. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  435. [   12.020101] Bluetooth: Core ver 2.22
  436. [   12.020160] NET: Registered protocol family 31
  437. [   12.020163] Bluetooth: HCI device and connection manager initialized
  438. [   12.020178] Bluetooth: HCI socket layer initialized
  439. [   12.020185] Bluetooth: L2CAP socket layer initialized
  440. [   12.020206] Bluetooth: SCO socket layer initialized
  441. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  442. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  443. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  444. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  445. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  446. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  447. [   12.347349] Bluetooth: BNEP socket layer initialized
  448. kevin@darach:/dev $ clear
  449. kevin@darach:/dev $ dmesg
  450. [    0.000000] Booting Linux on physical CPU 0x0
  451. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  452. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  453. [    0.000000] CPU: div instructions available: patching division code
  454. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  455. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  456. [    0.000000] Memory policy: Data cache writealloc
  457. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  458. [    0.000000] On node 0 totalpages: 242688
  459. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  460. [    0.000000]   Normal zone: 2133 pages used for memmap
  461. [    0.000000]   Normal zone: 0 pages reserved
  462. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  463. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  464. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  465. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  466. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  467. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  468. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  469. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  470. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  471. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  472. [    0.000000] Virtual kernel memory layout:
  473.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  474.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  475.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  476.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  477.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  478.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  479.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  480.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  481.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  482. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  483. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  484. [    0.000000] Hierarchical RCU implementation.
  485. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  486. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  487. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  488. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  489. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  490. [    0.000274] Console: colour dummy device 80x30
  491. [    0.000806] console [tty1] enabled
  492. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  493. [    0.000883] pid_max: default: 32768 minimum: 301
  494. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  495. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  496. [    0.002201] Disabling memory control group subsystem
  497. [    0.002294] CPU: Testing write buffer coherency: ok
  498. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  499. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  500. [    0.003272] Hierarchical SRCU implementation.
  501. [    0.003964] smp: Bringing up secondary CPUs ...
  502. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  503. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  504. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  505. [    0.006513] smp: Brought up 1 node, 4 CPUs
  506. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  507. [    0.006606] CPU: All CPU(s) started in HYP mode.
  508. [    0.006624] CPU: Virtualization extensions available.
  509. [    0.007517] devtmpfs: initialized
  510. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  511. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  512. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  513. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  514. [    0.019239] pinctrl core: initialized pinctrl subsystem
  515. [    0.020035] NET: Registered protocol family 16
  516. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  517. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  518. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  519. [    0.027705] Serial: AMBA PL011 UART driver
  520. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  521. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  522. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  523. [    0.062999] SCSI subsystem initialized
  524. [    0.063243] usbcore: registered new interface driver usbfs
  525. [    0.063313] usbcore: registered new interface driver hub
  526. [    0.063412] usbcore: registered new device driver usb
  527. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  528. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  529. [    0.147950] VFS: Disk quotas dquot_6.6.0
  530. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  531. [    0.148263] FS-Cache: Loaded
  532. [    0.148478] CacheFiles: Loaded
  533. [    0.157380] NET: Registered protocol family 2
  534. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  535. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  536. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  537. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  538. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  539. [    0.158896] NET: Registered protocol family 1
  540. [    0.159368] RPC: Registered named UNIX socket transport module.
  541. [    0.159391] RPC: Registered udp transport module.
  542. [    0.159410] RPC: Registered tcp transport module.
  543. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  544. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  545. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  546. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  547. [    0.172478] NFS: Registering the id_resolver key type
  548. [    0.172520] Key type id_resolver registered
  549. [    0.172540] Key type id_legacy registered
  550. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  551. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  552. [    0.174673] io scheduler noop registered
  553. [    0.174695] io scheduler deadline registered (default)
  554. [    0.174990] io scheduler cfq registered
  555. [    0.175012] io scheduler mq-deadline registered
  556. [    0.175031] io scheduler kyber registered
  557. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  558. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  559. [    0.227300] Console: switching to colour frame buffer device 228x61
  560. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  561. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  562. [    0.258635] vc-sm: Videocore shared memory driver
  563. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  564. [    0.269016] brd: module loaded
  565. [    0.278107] loop: module loaded
  566. [    0.278242] Loading iSCSI transport class v2.0-870.
  567. [    0.279078] libphy: Fixed MDIO Bus: probed
  568. [    0.279307] usbcore: registered new interface driver lan78xx
  569. [    0.279522] usbcore: registered new interface driver smsc95xx
  570. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  571. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  572. [    0.508094] Core Release: 2.80a
  573. [    0.508197] Setting default values for core params
  574. [    0.508357] Finished setting default values for core params
  575. [    0.708753] Using Buffer DMA mode
  576. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  577. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  578. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  579. [    0.709303] Dedicated Tx FIFOs mode
  580. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  581. [    0.710130] FIQ FSM acceleration enabled for :
  582.                Non-periodic Split Transactions
  583.                Periodic Split Transactions
  584.                High-Speed Isochronous Endpoints
  585.                Interrupt/Control Split Transaction hack enabled
  586. [    0.717507] dwc_otg: Microframe scheduler enabled
  587. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  588. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  589. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  590. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  591. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  592. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  593. [    0.758539] Init: Port Power? op_state=1
  594. [    0.765249] Init: Power Port (0)
  595. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  596. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  597. [    0.785776] usb usb1: Product: DWC OTG Controller
  598. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  599. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  600. [    0.806865] hub 1-0:1.0: USB hub found
  601. [    0.813545] hub 1-0:1.0: 1 port detected
  602. [    0.820654] dwc_otg: FIQ enabled
  603. [    0.820659] dwc_otg: NAK holdoff enabled
  604. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  605. [    0.820673] Module dwc_common_port init
  606. [    0.820914] usbcore: registered new interface driver usb-storage
  607. [    0.827718] mousedev: PS/2 mouse device common for all mice
  608. [    0.834488] IR NEC protocol handler initialized
  609. [    0.841176] IR RC5(x/sz) protocol handler initialized
  610. [    0.847845] IR RC6 protocol handler initialized
  611. [    0.854476] IR JVC protocol handler initialized
  612. [    0.860890] IR Sony protocol handler initialized
  613. [    0.867378] IR SANYO protocol handler initialized
  614. [    0.873888] IR Sharp protocol handler initialized
  615. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  616. [    0.886812] IR XMP protocol handler initialized
  617. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  618. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  619. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  620. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  621. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  622. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  623. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  624. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  625. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  626. [    0.957805] usbcore: registered new interface driver usbhid
  627. [    0.964417] usbhid: USB HID core driver
  628. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  629. [    0.979914] [vc_sm_connected_init]: start
  630. [    0.990138] [vc_sm_connected_init]: end - returning 0
  631. [    0.997465] Initializing XFRM netlink socket
  632. [    1.004189] NET: Registered protocol family 17
  633. [    1.010919] Key type dns_resolver registered
  634. [    1.018033] Registering SWP/SWPB emulation handler
  635. [    1.025266] registered taskstats version 1
  636. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  637. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  638. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  639. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  640. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  641. [    1.126990] random: fast init done
  642. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  643. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  644. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  645. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  646. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  647. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  648. [    1.228913] of_cfs_init
  649. [    1.235507] of_cfs_init: OK
  650. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  651. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  652. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  653. [    1.296877] mmc1: new high speed SDIO card at address 0001
  654. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  655. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  656. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  657. [    1.390149]  mmcblk0: p1 p2
  658. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  659. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  660. [    1.448622] devtmpfs: mounted
  661. [    1.458366] Freeing unused kernel memory: 1024K
  662. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  663. [    1.481908] NOHZ: local_softirq_pending 40
  664. [    1.488516] NOHZ: local_softirq_pending 40
  665. [    1.489639] NOHZ: local_softirq_pending 40
  666. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  667. [    1.516700] hub 1-1:1.0: USB hub found
  668. [    1.521779] NOHZ: local_softirq_pending 40
  669. [    1.530176] NOHZ: local_softirq_pending 40
  670. [    1.531774] NOHZ: local_softirq_pending 40
  671. [    1.544356] hub 1-1:1.0: 4 ports detected
  672. [    1.582047] NOHZ: local_softirq_pending 40
  673. [    1.588672] NOHZ: local_softirq_pending 40
  674. [    1.595057] NOHZ: local_softirq_pending 40
  675. [    1.601388] NOHZ: local_softirq_pending 40
  676. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  677. [    1.924382] systemd[1]: System time before build time, advancing clock.
  678. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  679. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  680. [    2.015369] hub 1-1.1:1.0: USB hub found
  681. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  682. [    2.052192] NET: Registered protocol family 10
  683. [    2.059497] Segment Routing with IPv6
  684. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  685. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  686. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  687. [    2.121472] systemd[1]: Detected architecture arm.
  688. [    2.156106] systemd[1]: Set hostname to <darach>.
  689. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  690. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  691. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  692. [    2.622376] systemd[1]: Listening on udev Control Socket.
  693. [    2.637651] systemd[1]: Listening on Journal Socket.
  694. [    2.652846] systemd[1]: Created slice User and Session Slice.
  695. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  696. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  697. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  698. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  699. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  700. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  701. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  702. [    3.240965] libphy: lan78xx-mdiobus: probed
  703. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  704. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  705. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  706. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  707. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  708. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  709. [    4.443078] usbcore: registered new interface driver brcmfmac
  710. [    4.689993] random: crng init done
  711. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  712. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  713. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  714. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  715. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  716. [    5.924523] brcmfmac: power management disabled
  717. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  718. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  719. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  720. [   12.020101] Bluetooth: Core ver 2.22
  721. [   12.020160] NET: Registered protocol family 31
  722. [   12.020163] Bluetooth: HCI device and connection manager initialized
  723. [   12.020178] Bluetooth: HCI socket layer initialized
  724. [   12.020185] Bluetooth: L2CAP socket layer initialized
  725. [   12.020206] Bluetooth: SCO socket layer initialized
  726. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  727. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  728. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  729. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  730. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  731. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  732. [   12.347349] Bluetooth: BNEP socket layer initialized
  733. kevin@darach:/dev $ dmesg /q phrik ptpb
  734.  
  735. Usage:
  736.  dmesg [options]
  737.  
  738. Display or control the kernel ring buffer.
  739.  
  740. Options:
  741.  -C, --clear                 clear the kernel ring buffer
  742.  -c, --read-clear            read and clear all messages
  743.  -D, --console-off           disable printing messages to console
  744.  -E, --console-on            enable printing messages to console
  745.  -F, --file <file>           use the file instead of the kernel log buffer
  746.  -f, --facility <list>       restrict output to defined facilities
  747.  -H, --human                 human readable output
  748.  -k, --kernel                display kernel messages
  749.  -L, --color[=<when>]        colorize messages (auto, always or never)
  750.                                colors are enabled by default
  751.  -l, --level <list>          restrict output to defined levels
  752.  -n, --console-level <level> set level of messages printed to console
  753.  -P, --nopager               do not pipe output into a pager
  754.  -r, --raw                   print the raw message buffer
  755.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  756.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  757.  -u, --userspace             display userspace messages
  758.  -w, --follow                wait for new messages
  759.  -x, --decode                decode facility and level to readable string
  760.  -d, --show-delta            show time delta between printed messages
  761.  -e, --reltime               show local time and time delta in readable format
  762.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  763.  -t, --notime                don't show any timestamp with messages
  764.      --time-format <format>  show timestamp using the given format:
  765.                                [delta|reltime|ctime|notime|iso]
  766. Suspending/resume will make ctime and iso timestamps inaccurate.
  767.  
  768.  -h, --help     display this help and exit
  769.  -V, --version  output version information and exit
  770.  
  771. Supported log facilities:
  772.     kern - kernel messages
  773.     user - random user-level messages
  774.     mail - mail system
  775.   daemon - system daemons
  776.     auth - security/authorization messages
  777.   syslog - messages generated internally by syslogd
  778.      lpr - line printer subsystem
  779.     news - network news subsystem
  780.  
  781. Supported log levels (priorities):
  782.    emerg - system is unusable
  783.    alert - action must be taken immediately
  784.     crit - critical conditions
  785.      err - error conditions
  786.     warn - warning conditions
  787.   notice - normal but significant condition
  788.     info - informational
  789.    debug - debug-level messages
  790.  
  791.  
  792. For more details see dmesg(1).
  793. kevin@darach:/dev $ dmesg > message.txt
  794. -bash: message.txt: Toegang geweigerd
  795. kevin@darach:/dev $ cd
  796. kevin@darach:~ $ dmesg > message.txt
  797. kevin@darach:~ $ nano message.txt
  798. kevin@darach:~ $ vi message.txt
  799. [    0.000000] Hierarchical RCU implementation.
  800. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  801. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  802. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  803. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  804. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  805. [    0.000274] Console: colour dummy device 80x30
  806. [    0.000806] console [tty1] enabled
  807. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  808. [    0.000883] pid_max: default: 32768 minimum: 301
  809. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  810. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  811. [    0.002201] Disabling memory control group subsystem
  812. [    0.002294] CPU: Testing write buffer coherency: ok
  813. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  814. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  815. [    0.003272] Hierarchical SRCU implementation.
  816. [    0.003964] smp: Bringing up secondary CPUs ...
  817. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  818. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  819. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  820. [    0.006513] smp: Brought up 1 node, 4 CPUs
  821. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  822. [    0.006606] CPU: All CPU(s) started in HYP mode.
  823. [    0.006624] CPU: Virtualization extensions available.
  824. [    0.007517] devtmpfs: initialized
  825. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  826. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  827. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  828. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  829. [    0.019239] pinctrl core: initialized pinctrl subsystem
  830. [    0.020035] NET: Registered protocol family 16
  831. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  832. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  833. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  834. [    0.027705] Serial: AMBA PL011 UART driver
  835. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  836. [    3.240965] libphy: lan78xx-mdiobus: probed
  837. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  838. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  839. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  840. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  841. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  842. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  843. [    4.443078] usbcore: registered new interface driver brcmfmac
  844. [    4.689993] random: crng init done
  845. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  846. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  847. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  848. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  849. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  850. [    5.924523] brcmfmac: power management disabled
  851. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  852. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  853. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  854. [   12.020101] Bluetooth: Core ver 2.22
  855. [   12.020160] NET: Registered protocol family 31
  856. [   12.020163] Bluetooth: HCI device and connection manager initialized
  857. [   12.020178] Bluetooth: HCI socket layer initialized
  858. [   12.020185] Bluetooth: L2CAP socket layer initialized
  859. [   12.020206] Bluetooth: SCO socket layer initialized
  860. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  861. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  862. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  863. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  864. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  865. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  866. [   12.347349] Bluetooth: BNEP socket layer initialized
  867. kevin@darach:/dev $ clear
  868. kevin@darach:/dev $ dmesg
  869. [    0.000000] Booting Linux on physical CPU 0x0
  870. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  871. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  872. [    0.000000] CPU: div instructions available: patching division code
  873. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  874. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  875. [    0.000000] Memory policy: Data cache writealloc
  876. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  877. [    0.000000] On node 0 totalpages: 242688
  878. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  879. [    0.000000]   Normal zone: 2133 pages used for memmap
  880. [    0.000000]   Normal zone: 0 pages reserved
  881. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  882. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  883. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  884. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  885. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  886. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  887. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  888. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  889. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  890. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  891. [    0.000000] Virtual kernel memory layout:
  892.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  893.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  894.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  895.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  896.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  897.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  898.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  899.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  900.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  901. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  902. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  903. [    0.000000] Hierarchical RCU implementation.
  904. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  905. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  906. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  907. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  908. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  909. [    0.000274] Console: colour dummy device 80x30
  910. [    0.000806] console [tty1] enabled
  911. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  912. [    0.000883] pid_max: default: 32768 minimum: 301
  913. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  914. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  915. [    0.002201] Disabling memory control group subsystem
  916. [    0.002294] CPU: Testing write buffer coherency: ok
  917. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  918. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  919. [    0.003272] Hierarchical SRCU implementation.
  920. [    0.003964] smp: Bringing up secondary CPUs ...
  921. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  922. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  923. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  924. [    0.006513] smp: Brought up 1 node, 4 CPUs
  925. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  926. [    0.006606] CPU: All CPU(s) started in HYP mode.
  927. [    0.006624] CPU: Virtualization extensions available.
  928. [    0.007517] devtmpfs: initialized
  929. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  930. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  931. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  932. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  933. [    0.019239] pinctrl core: initialized pinctrl subsystem
  934. [    0.020035] NET: Registered protocol family 16
  935. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  936. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  937. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  938. [    0.027705] Serial: AMBA PL011 UART driver
  939. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  940. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  941. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  942. [    0.062999] SCSI subsystem initialized
  943. [    0.063243] usbcore: registered new interface driver usbfs
  944. [    0.063313] usbcore: registered new interface driver hub
  945. [    0.063412] usbcore: registered new device driver usb
  946. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  947. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  948. [    0.147950] VFS: Disk quotas dquot_6.6.0
  949. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  950. [    0.148263] FS-Cache: Loaded
  951. [    0.148478] CacheFiles: Loaded
  952. [    0.157380] NET: Registered protocol family 2
  953. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  954. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  955. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  956. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  957. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  958. [    0.158896] NET: Registered protocol family 1
  959. [    0.159368] RPC: Registered named UNIX socket transport module.
  960. [    0.159391] RPC: Registered udp transport module.
  961. [    0.159410] RPC: Registered tcp transport module.
  962. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  963. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  964. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  965. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  966. [    0.172478] NFS: Registering the id_resolver key type
  967. [    0.172520] Key type id_resolver registered
  968. [    0.172540] Key type id_legacy registered
  969. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  970. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  971. [    0.174673] io scheduler noop registered
  972. [    0.174695] io scheduler deadline registered (default)
  973. [    0.174990] io scheduler cfq registered
  974. [    0.175012] io scheduler mq-deadline registered
  975. [    0.175031] io scheduler kyber registered
  976. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  977. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  978. [    0.227300] Console: switching to colour frame buffer device 228x61
  979. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  980. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  981. [    0.258635] vc-sm: Videocore shared memory driver
  982. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  983. [    0.269016] brd: module loaded
  984. [    0.278107] loop: module loaded
  985. [    0.278242] Loading iSCSI transport class v2.0-870.
  986. [    0.279078] libphy: Fixed MDIO Bus: probed
  987. [    0.279307] usbcore: registered new interface driver lan78xx
  988. [    0.279522] usbcore: registered new interface driver smsc95xx
  989. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  990. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  991. [    0.508094] Core Release: 2.80a
  992. [    0.508197] Setting default values for core params
  993. [    0.508357] Finished setting default values for core params
  994. [    0.708753] Using Buffer DMA mode
  995. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  996. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  997. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  998. [    0.709303] Dedicated Tx FIFOs mode
  999. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  1000. [    0.710130] FIQ FSM acceleration enabled for :
  1001.                Non-periodic Split Transactions
  1002.                Periodic Split Transactions
  1003.                High-Speed Isochronous Endpoints
  1004.                Interrupt/Control Split Transaction hack enabled
  1005. [    0.717507] dwc_otg: Microframe scheduler enabled
  1006. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  1007. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  1008. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  1009. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  1010. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  1011. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  1012. [    0.758539] Init: Port Power? op_state=1
  1013. [    0.765249] Init: Power Port (0)
  1014. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1015. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1016. [    0.785776] usb usb1: Product: DWC OTG Controller
  1017. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  1018. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  1019. [    0.806865] hub 1-0:1.0: USB hub found
  1020. [    0.813545] hub 1-0:1.0: 1 port detected
  1021. [    0.820654] dwc_otg: FIQ enabled
  1022. [    0.820659] dwc_otg: NAK holdoff enabled
  1023. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  1024. [    0.820673] Module dwc_common_port init
  1025. [    0.820914] usbcore: registered new interface driver usb-storage
  1026. [    0.827718] mousedev: PS/2 mouse device common for all mice
  1027. [    0.834488] IR NEC protocol handler initialized
  1028. [    0.841176] IR RC5(x/sz) protocol handler initialized
  1029. [    0.847845] IR RC6 protocol handler initialized
  1030. [    0.854476] IR JVC protocol handler initialized
  1031. [    0.860890] IR Sony protocol handler initialized
  1032. [    0.867378] IR SANYO protocol handler initialized
  1033. [    0.873888] IR Sharp protocol handler initialized
  1034. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  1035. [    0.886812] IR XMP protocol handler initialized
  1036. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  1037. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  1038. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  1039. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  1040. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  1041. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  1042. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  1043. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  1044. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  1045. [    0.957805] usbcore: registered new interface driver usbhid
  1046. [    0.964417] usbhid: USB HID core driver
  1047. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  1048. [    0.979914] [vc_sm_connected_init]: start
  1049. [    0.990138] [vc_sm_connected_init]: end - returning 0
  1050. [    0.997465] Initializing XFRM netlink socket
  1051. [    1.004189] NET: Registered protocol family 17
  1052. [    1.010919] Key type dns_resolver registered
  1053. [    1.018033] Registering SWP/SWPB emulation handler
  1054. [    1.025266] registered taskstats version 1
  1055. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  1056. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  1057. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  1058. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  1059. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  1060. [    1.126990] random: fast init done
  1061. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  1062. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  1063. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  1064. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  1065. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  1066. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  1067. [    1.228913] of_cfs_init
  1068. [    1.235507] of_cfs_init: OK
  1069. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  1070. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  1071. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  1072. [    1.296877] mmc1: new high speed SDIO card at address 0001
  1073. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  1074. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  1075. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  1076. [    1.390149]  mmcblk0: p1 p2
  1077. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  1078. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  1079. [    1.448622] devtmpfs: mounted
  1080. [    1.458366] Freeing unused kernel memory: 1024K
  1081. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  1082. [    1.481908] NOHZ: local_softirq_pending 40
  1083. [    1.488516] NOHZ: local_softirq_pending 40
  1084. [    1.489639] NOHZ: local_softirq_pending 40
  1085. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1086. [    1.516700] hub 1-1:1.0: USB hub found
  1087. [    1.521779] NOHZ: local_softirq_pending 40
  1088. [    1.530176] NOHZ: local_softirq_pending 40
  1089. [    1.531774] NOHZ: local_softirq_pending 40
  1090. [    1.544356] hub 1-1:1.0: 4 ports detected
  1091. [    1.582047] NOHZ: local_softirq_pending 40
  1092. [    1.588672] NOHZ: local_softirq_pending 40
  1093. [    1.595057] NOHZ: local_softirq_pending 40
  1094. [    1.601388] NOHZ: local_softirq_pending 40
  1095. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  1096. [    1.924382] systemd[1]: System time before build time, advancing clock.
  1097. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  1098. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1099. [    2.015369] hub 1-1.1:1.0: USB hub found
  1100. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  1101. [    2.052192] NET: Registered protocol family 10
  1102. [    2.059497] Segment Routing with IPv6
  1103. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  1104. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  1105. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  1106. [    2.121472] systemd[1]: Detected architecture arm.
  1107. [    2.156106] systemd[1]: Set hostname to <darach>.
  1108. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  1109. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  1110. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  1111. [    2.622376] systemd[1]: Listening on udev Control Socket.
  1112. [    2.637651] systemd[1]: Listening on Journal Socket.
  1113. [    2.652846] systemd[1]: Created slice User and Session Slice.
  1114. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  1115. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1116. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  1117. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  1118. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  1119. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  1120. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1121. [    3.240965] libphy: lan78xx-mdiobus: probed
  1122. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  1123. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  1124. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  1125. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  1126. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  1127. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  1128. [    4.443078] usbcore: registered new interface driver brcmfmac
  1129. [    4.689993] random: crng init done
  1130. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  1131. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  1132. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  1133. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  1134. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1135. [    5.924523] brcmfmac: power management disabled
  1136. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  1137. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1138. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1139. [   12.020101] Bluetooth: Core ver 2.22
  1140. [   12.020160] NET: Registered protocol family 31
  1141. [   12.020163] Bluetooth: HCI device and connection manager initialized
  1142. [   12.020178] Bluetooth: HCI socket layer initialized
  1143. [   12.020185] Bluetooth: L2CAP socket layer initialized
  1144. [   12.020206] Bluetooth: SCO socket layer initialized
  1145. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  1146. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  1147. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1148. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  1149. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1150. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  1151. [   12.347349] Bluetooth: BNEP socket layer initialized
  1152. kevin@darach:/dev $ dmesg /q phrik ptpb
  1153.  
  1154. Usage:
  1155.  dmesg [options]
  1156.  
  1157. Display or control the kernel ring buffer.
  1158.  
  1159. Options:
  1160.  -C, --clear                 clear the kernel ring buffer
  1161.  -c, --read-clear            read and clear all messages
  1162.  -D, --console-off           disable printing messages to console
  1163.  -E, --console-on            enable printing messages to console
  1164.  -F, --file <file>           use the file instead of the kernel log buffer
  1165.  -f, --facility <list>       restrict output to defined facilities
  1166.  -H, --human                 human readable output
  1167.  -k, --kernel                display kernel messages
  1168.  -L, --color[=<when>]        colorize messages (auto, always or never)
  1169.                                colors are enabled by default
  1170.  -l, --level <list>          restrict output to defined levels
  1171.  -n, --console-level <level> set level of messages printed to console
  1172.  -P, --nopager               do not pipe output into a pager
  1173.  -r, --raw                   print the raw message buffer
  1174.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  1175.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  1176.  -u, --userspace             display userspace messages
  1177.  -w, --follow                wait for new messages
  1178.  -x, --decode                decode facility and level to readable string
  1179.  -d, --show-delta            show time delta between printed messages
  1180.  -e, --reltime               show local time and time delta in readable format
  1181.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  1182.  -t, --notime                don't show any timestamp with messages
  1183.      --time-format <format>  show timestamp using the given format:
  1184.                                [delta|reltime|ctime|notime|iso]
  1185. Suspending/resume will make ctime and iso timestamps inaccurate.
  1186.  
  1187.  -h, --help     display this help and exit
  1188.  -V, --version  output version information and exit
  1189.  
  1190. Supported log facilities:
  1191.     kern - kernel messages
  1192.     user - random user-level messages
  1193.     mail - mail system
  1194.   daemon - system daemons
  1195.     auth - security/authorization messages
  1196.   syslog - messages generated internally by syslogd
  1197.      lpr - line printer subsystem
  1198.     news - network news subsystem
  1199.  
  1200. Supported log levels (priorities):
  1201.    emerg - system is unusable
  1202.    alert - action must be taken immediately
  1203.     crit - critical conditions
  1204.      err - error conditions
  1205.     warn - warning conditions
  1206.   notice - normal but significant condition
  1207.     info - informational
  1208.    debug - debug-level messages
  1209.  
  1210.  
  1211. For more details see dmesg(1).
  1212. kevin@darach:/dev $ dmesg > message.txt
  1213. -bash: message.txt: Toegang geweigerd
  1214. kevin@darach:/dev $ cd
  1215. kevin@darach:~ $ dmesg > message.txt
  1216. kevin@darach:~ $ nano message.txt
  1217. kevin@darach:~ $ vi message.txt
  1218. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  1219. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  1220. [    0.062999] SCSI subsystem initialized
  1221. [    0.063243] usbcore: registered new interface driver usbfs
  1222. [    0.063313] usbcore: registered new interface driver hub
  1223. [    0.063412] usbcore: registered new device driver usb
  1224. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  1225. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  1226. [    0.147950] VFS: Disk quotas dquot_6.6.0
  1227. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1228. [    0.148263] FS-Cache: Loaded
  1229. [    0.148478] CacheFiles: Loaded
  1230. [    0.157380] NET: Registered protocol family 2
  1231. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  1232. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  1233. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  1234. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  1235. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1236. [    0.158896] NET: Registered protocol family 1
  1237. [    0.159368] RPC: Registered named UNIX socket transport module.
  1238. [    0.159391] RPC: Registered udp transport module.
  1239. [    0.159410] RPC: Registered tcp transport module.
  1240. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1241. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  1242. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  1243. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  1244. [    0.172478] NFS: Registering the id_resolver key type
  1245. [    0.172520] Key type id_resolver registered
  1246. [    0.172540] Key type id_legacy registered
  1247. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  1248. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  1249. [    0.174673] io scheduler noop registered
  1250. [    0.174695] io scheduler deadline registered (default)
  1251. [    0.174990] io scheduler cfq registered
  1252. [    0.175012] io scheduler mq-deadline registered
  1253. [    0.175031] io scheduler kyber registered
  1254. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  1255. [    3.240965] libphy: lan78xx-mdiobus: probed
  1256. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  1257. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  1258. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  1259. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  1260. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  1261. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  1262. [    4.443078] usbcore: registered new interface driver brcmfmac
  1263. [    4.689993] random: crng init done
  1264. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  1265. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  1266. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  1267. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  1268. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1269. [    5.924523] brcmfmac: power management disabled
  1270. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  1271. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1272. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1273. [   12.020101] Bluetooth: Core ver 2.22
  1274. [   12.020160] NET: Registered protocol family 31
  1275. [   12.020163] Bluetooth: HCI device and connection manager initialized
  1276. [   12.020178] Bluetooth: HCI socket layer initialized
  1277. [   12.020185] Bluetooth: L2CAP socket layer initialized
  1278. [   12.020206] Bluetooth: SCO socket layer initialized
  1279. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  1280. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  1281. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1282. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  1283. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1284. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  1285. [   12.347349] Bluetooth: BNEP socket layer initialized
  1286. kevin@darach:/dev $ clear
  1287. kevin@darach:/dev $ dmesg
  1288. [    0.000000] Booting Linux on physical CPU 0x0
  1289. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  1290. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  1291. [    0.000000] CPU: div instructions available: patching division code
  1292. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1293. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  1294. [    0.000000] Memory policy: Data cache writealloc
  1295. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  1296. [    0.000000] On node 0 totalpages: 242688
  1297. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  1298. [    0.000000]   Normal zone: 2133 pages used for memmap
  1299. [    0.000000]   Normal zone: 0 pages reserved
  1300. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  1301. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  1302. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  1303. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  1304. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  1305. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  1306. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  1307. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1308. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1309. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  1310. [    0.000000] Virtual kernel memory layout:
  1311.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  1312.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  1313.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  1314.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  1315.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  1316.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  1317.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  1318.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  1319.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  1320. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  1321. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  1322. [    0.000000] Hierarchical RCU implementation.
  1323. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  1324. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  1325. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  1326. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  1327. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  1328. [    0.000274] Console: colour dummy device 80x30
  1329. [    0.000806] console [tty1] enabled
  1330. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  1331. [    0.000883] pid_max: default: 32768 minimum: 301
  1332. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  1333. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  1334. [    0.002201] Disabling memory control group subsystem
  1335. [    0.002294] CPU: Testing write buffer coherency: ok
  1336. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  1337. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  1338. [    0.003272] Hierarchical SRCU implementation.
  1339. [    0.003964] smp: Bringing up secondary CPUs ...
  1340. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  1341. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  1342. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  1343. [    0.006513] smp: Brought up 1 node, 4 CPUs
  1344. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  1345. [    0.006606] CPU: All CPU(s) started in HYP mode.
  1346. [    0.006624] CPU: Virtualization extensions available.
  1347. [    0.007517] devtmpfs: initialized
  1348. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  1349. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  1350. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  1351. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  1352. [    0.019239] pinctrl core: initialized pinctrl subsystem
  1353. [    0.020035] NET: Registered protocol family 16
  1354. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  1355. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  1356. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  1357. [    0.027705] Serial: AMBA PL011 UART driver
  1358. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  1359. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  1360. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  1361. [    0.062999] SCSI subsystem initialized
  1362. [    0.063243] usbcore: registered new interface driver usbfs
  1363. [    0.063313] usbcore: registered new interface driver hub
  1364. [    0.063412] usbcore: registered new device driver usb
  1365. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  1366. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  1367. [    0.147950] VFS: Disk quotas dquot_6.6.0
  1368. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1369. [    0.148263] FS-Cache: Loaded
  1370. [    0.148478] CacheFiles: Loaded
  1371. [    0.157380] NET: Registered protocol family 2
  1372. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  1373. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  1374. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  1375. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  1376. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1377. [    0.158896] NET: Registered protocol family 1
  1378. [    0.159368] RPC: Registered named UNIX socket transport module.
  1379. [    0.159391] RPC: Registered udp transport module.
  1380. [    0.159410] RPC: Registered tcp transport module.
  1381. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1382. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  1383. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  1384. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  1385. [    0.172478] NFS: Registering the id_resolver key type
  1386. [    0.172520] Key type id_resolver registered
  1387. [    0.172540] Key type id_legacy registered
  1388. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  1389. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  1390. [    0.174673] io scheduler noop registered
  1391. [    0.174695] io scheduler deadline registered (default)
  1392. [    0.174990] io scheduler cfq registered
  1393. [    0.175012] io scheduler mq-deadline registered
  1394. [    0.175031] io scheduler kyber registered
  1395. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  1396. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  1397. [    0.227300] Console: switching to colour frame buffer device 228x61
  1398. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  1399. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  1400. [    0.258635] vc-sm: Videocore shared memory driver
  1401. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  1402. [    0.269016] brd: module loaded
  1403. [    0.278107] loop: module loaded
  1404. [    0.278242] Loading iSCSI transport class v2.0-870.
  1405. [    0.279078] libphy: Fixed MDIO Bus: probed
  1406. [    0.279307] usbcore: registered new interface driver lan78xx
  1407. [    0.279522] usbcore: registered new interface driver smsc95xx
  1408. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  1409. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  1410. [    0.508094] Core Release: 2.80a
  1411. [    0.508197] Setting default values for core params
  1412. [    0.508357] Finished setting default values for core params
  1413. [    0.708753] Using Buffer DMA mode
  1414. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  1415. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  1416. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  1417. [    0.709303] Dedicated Tx FIFOs mode
  1418. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  1419. [    0.710130] FIQ FSM acceleration enabled for :
  1420.                Non-periodic Split Transactions
  1421.                Periodic Split Transactions
  1422.                High-Speed Isochronous Endpoints
  1423.                Interrupt/Control Split Transaction hack enabled
  1424. [    0.717507] dwc_otg: Microframe scheduler enabled
  1425. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  1426. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  1427. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  1428. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  1429. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  1430. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  1431. [    0.758539] Init: Port Power? op_state=1
  1432. [    0.765249] Init: Power Port (0)
  1433. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1434. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1435. [    0.785776] usb usb1: Product: DWC OTG Controller
  1436. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  1437. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  1438. [    0.806865] hub 1-0:1.0: USB hub found
  1439. [    0.813545] hub 1-0:1.0: 1 port detected
  1440. [    0.820654] dwc_otg: FIQ enabled
  1441. [    0.820659] dwc_otg: NAK holdoff enabled
  1442. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  1443. [    0.820673] Module dwc_common_port init
  1444. [    0.820914] usbcore: registered new interface driver usb-storage
  1445. [    0.827718] mousedev: PS/2 mouse device common for all mice
  1446. [    0.834488] IR NEC protocol handler initialized
  1447. [    0.841176] IR RC5(x/sz) protocol handler initialized
  1448. [    0.847845] IR RC6 protocol handler initialized
  1449. [    0.854476] IR JVC protocol handler initialized
  1450. [    0.860890] IR Sony protocol handler initialized
  1451. [    0.867378] IR SANYO protocol handler initialized
  1452. [    0.873888] IR Sharp protocol handler initialized
  1453. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  1454. [    0.886812] IR XMP protocol handler initialized
  1455. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  1456. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  1457. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  1458. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  1459. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  1460. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  1461. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  1462. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  1463. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  1464. [    0.957805] usbcore: registered new interface driver usbhid
  1465. [    0.964417] usbhid: USB HID core driver
  1466. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  1467. [    0.979914] [vc_sm_connected_init]: start
  1468. [    0.990138] [vc_sm_connected_init]: end - returning 0
  1469. [    0.997465] Initializing XFRM netlink socket
  1470. [    1.004189] NET: Registered protocol family 17
  1471. [    1.010919] Key type dns_resolver registered
  1472. [    1.018033] Registering SWP/SWPB emulation handler
  1473. [    1.025266] registered taskstats version 1
  1474. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  1475. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  1476. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  1477. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  1478. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  1479. [    1.126990] random: fast init done
  1480. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  1481. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  1482. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  1483. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  1484. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  1485. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  1486. [    1.228913] of_cfs_init
  1487. [    1.235507] of_cfs_init: OK
  1488. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  1489. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  1490. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  1491. [    1.296877] mmc1: new high speed SDIO card at address 0001
  1492. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  1493. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  1494. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  1495. [    1.390149]  mmcblk0: p1 p2
  1496. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  1497. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  1498. [    1.448622] devtmpfs: mounted
  1499. [    1.458366] Freeing unused kernel memory: 1024K
  1500. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  1501. [    1.481908] NOHZ: local_softirq_pending 40
  1502. [    1.488516] NOHZ: local_softirq_pending 40
  1503. [    1.489639] NOHZ: local_softirq_pending 40
  1504. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1505. [    1.516700] hub 1-1:1.0: USB hub found
  1506. [    1.521779] NOHZ: local_softirq_pending 40
  1507. [    1.530176] NOHZ: local_softirq_pending 40
  1508. [    1.531774] NOHZ: local_softirq_pending 40
  1509. [    1.544356] hub 1-1:1.0: 4 ports detected
  1510. [    1.582047] NOHZ: local_softirq_pending 40
  1511. [    1.588672] NOHZ: local_softirq_pending 40
  1512. [    1.595057] NOHZ: local_softirq_pending 40
  1513. [    1.601388] NOHZ: local_softirq_pending 40
  1514. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  1515. [    1.924382] systemd[1]: System time before build time, advancing clock.
  1516. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  1517. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1518. [    2.015369] hub 1-1.1:1.0: USB hub found
  1519. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  1520. [    2.052192] NET: Registered protocol family 10
  1521. [    2.059497] Segment Routing with IPv6
  1522. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  1523. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  1524. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  1525. [    2.121472] systemd[1]: Detected architecture arm.
  1526. [    2.156106] systemd[1]: Set hostname to <darach>.
  1527. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  1528. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  1529. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  1530. [    2.622376] systemd[1]: Listening on udev Control Socket.
  1531. [    2.637651] systemd[1]: Listening on Journal Socket.
  1532. [    2.652846] systemd[1]: Created slice User and Session Slice.
  1533. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  1534. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1535. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  1536. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  1537. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  1538. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  1539. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1540. [    3.240965] libphy: lan78xx-mdiobus: probed
  1541. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  1542. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  1543. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  1544. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  1545. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  1546. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  1547. [    4.443078] usbcore: registered new interface driver brcmfmac
  1548. [    4.689993] random: crng init done
  1549. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  1550. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  1551. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  1552. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  1553. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1554. [    5.924523] brcmfmac: power management disabled
  1555. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  1556. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1557. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1558. [   12.020101] Bluetooth: Core ver 2.22
  1559. [   12.020160] NET: Registered protocol family 31
  1560. [   12.020163] Bluetooth: HCI device and connection manager initialized
  1561. [   12.020178] Bluetooth: HCI socket layer initialized
  1562. [   12.020185] Bluetooth: L2CAP socket layer initialized
  1563. [   12.020206] Bluetooth: SCO socket layer initialized
  1564. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  1565. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  1566. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1567. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  1568. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1569. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  1570. [   12.347349] Bluetooth: BNEP socket layer initialized
  1571. kevin@darach:/dev $ dmesg /q phrik ptpb
  1572.  
  1573. Usage:
  1574.  dmesg [options]
  1575.  
  1576. Display or control the kernel ring buffer.
  1577.  
  1578. Options:
  1579.  -C, --clear                 clear the kernel ring buffer
  1580.  -c, --read-clear            read and clear all messages
  1581.  -D, --console-off           disable printing messages to console
  1582.  -E, --console-on            enable printing messages to console
  1583.  -F, --file <file>           use the file instead of the kernel log buffer
  1584.  -f, --facility <list>       restrict output to defined facilities
  1585.  -H, --human                 human readable output
  1586.  -k, --kernel                display kernel messages
  1587.  -L, --color[=<when>]        colorize messages (auto, always or never)
  1588.                                colors are enabled by default
  1589.  -l, --level <list>          restrict output to defined levels
  1590.  -n, --console-level <level> set level of messages printed to console
  1591.  -P, --nopager               do not pipe output into a pager
  1592.  -r, --raw                   print the raw message buffer
  1593.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  1594.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  1595.  -u, --userspace             display userspace messages
  1596.  -w, --follow                wait for new messages
  1597.  -x, --decode                decode facility and level to readable string
  1598.  -d, --show-delta            show time delta between printed messages
  1599.  -e, --reltime               show local time and time delta in readable format
  1600.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  1601.  -t, --notime                don't show any timestamp with messages
  1602.      --time-format <format>  show timestamp using the given format:
  1603.                                [delta|reltime|ctime|notime|iso]
  1604. Suspending/resume will make ctime and iso timestamps inaccurate.
  1605.  
  1606.  -h, --help     display this help and exit
  1607.  -V, --version  output version information and exit
  1608.  
  1609. Supported log facilities:
  1610.     kern - kernel messages
  1611.     user - random user-level messages
  1612.     mail - mail system
  1613.   daemon - system daemons
  1614.     auth - security/authorization messages
  1615.   syslog - messages generated internally by syslogd
  1616.      lpr - line printer subsystem
  1617.     news - network news subsystem
  1618.  
  1619. Supported log levels (priorities):
  1620.    emerg - system is unusable
  1621.    alert - action must be taken immediately
  1622.     crit - critical conditions
  1623.      err - error conditions
  1624.     warn - warning conditions
  1625.   notice - normal but significant condition
  1626.     info - informational
  1627.    debug - debug-level messages
  1628.  
  1629.  
  1630. For more details see dmesg(1).
  1631. kevin@darach:/dev $ dmesg > message.txt
  1632. -bash: message.txt: Toegang geweigerd
  1633. kevin@darach:/dev $ cd
  1634. kevin@darach:~ $ dmesg > message.txt
  1635. kevin@darach:~ $ nano message.txt
  1636. kevin@darach:~ $ vi message.txt
  1637. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  1638. [    0.227300] Console: switching to colour frame buffer device 228x61
  1639. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  1640. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  1641. [    0.258635] vc-sm: Videocore shared memory driver
  1642. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  1643. [    0.269016] brd: module loaded
  1644. [    0.278107] loop: module loaded
  1645. [    0.278242] Loading iSCSI transport class v2.0-870.
  1646. [    0.279078] libphy: Fixed MDIO Bus: probed
  1647. [    0.279307] usbcore: registered new interface driver lan78xx
  1648. [    0.279522] usbcore: registered new interface driver smsc95xx
  1649. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  1650. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  1651. [    0.508094] Core Release: 2.80a
  1652. [    0.508197] Setting default values for core params
  1653. [    0.508357] Finished setting default values for core params
  1654. [    0.708753] Using Buffer DMA mode
  1655. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  1656. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  1657. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  1658. [    0.709303] Dedicated Tx FIFOs mode
  1659. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  1660. [    0.710130] FIQ FSM acceleration enabled for :
  1661.                Non-periodic Split Transactions
  1662.                Periodic Split Transactions
  1663.                High-Speed Isochronous Endpoints
  1664.                Interrupt/Control Split Transaction hack enabled
  1665. [    0.717507] dwc_otg: Microframe scheduler enabled
  1666. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  1667. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  1668. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  1669. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  1670. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  1671. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  1672. [    0.758539] Init: Port Power? op_state=1
  1673. [    0.765249] Init: Power Port (0)
  1674. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1675. [    3.240965] libphy: lan78xx-mdiobus: probed
  1676. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  1677. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  1678. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  1679. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  1680. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  1681. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  1682. [    4.443078] usbcore: registered new interface driver brcmfmac
  1683. [    4.689993] random: crng init done
  1684. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  1685. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  1686. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  1687. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  1688. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1689. [    5.924523] brcmfmac: power management disabled
  1690. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  1691. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1692. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1693. [   12.020101] Bluetooth: Core ver 2.22
  1694. [   12.020160] NET: Registered protocol family 31
  1695. [   12.020163] Bluetooth: HCI device and connection manager initialized
  1696. [   12.020178] Bluetooth: HCI socket layer initialized
  1697. [   12.020185] Bluetooth: L2CAP socket layer initialized
  1698. [   12.020206] Bluetooth: SCO socket layer initialized
  1699. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  1700. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  1701. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1702. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  1703. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1704. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  1705. [   12.347349] Bluetooth: BNEP socket layer initialized
  1706. kevin@darach:/dev $ clear
  1707. kevin@darach:/dev $ dmesg
  1708. [    0.000000] Booting Linux on physical CPU 0x0
  1709. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  1710. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  1711. [    0.000000] CPU: div instructions available: patching division code
  1712. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1713. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  1714. [    0.000000] Memory policy: Data cache writealloc
  1715. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  1716. [    0.000000] On node 0 totalpages: 242688
  1717. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  1718. [    0.000000]   Normal zone: 2133 pages used for memmap
  1719. [    0.000000]   Normal zone: 0 pages reserved
  1720. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  1721. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  1722. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  1723. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  1724. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  1725. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  1726. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  1727. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1728. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1729. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  1730. [    0.000000] Virtual kernel memory layout:
  1731.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  1732.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  1733.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  1734.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  1735.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  1736.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  1737.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  1738.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  1739.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  1740. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  1741. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  1742. [    0.000000] Hierarchical RCU implementation.
  1743. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  1744. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  1745. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  1746. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  1747. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  1748. [    0.000274] Console: colour dummy device 80x30
  1749. [    0.000806] console [tty1] enabled
  1750. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  1751. [    0.000883] pid_max: default: 32768 minimum: 301
  1752. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  1753. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  1754. [    0.002201] Disabling memory control group subsystem
  1755. [    0.002294] CPU: Testing write buffer coherency: ok
  1756. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  1757. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  1758. [    0.003272] Hierarchical SRCU implementation.
  1759. [    0.003964] smp: Bringing up secondary CPUs ...
  1760. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  1761. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  1762. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  1763. [    0.006513] smp: Brought up 1 node, 4 CPUs
  1764. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  1765. [    0.006606] CPU: All CPU(s) started in HYP mode.
  1766. [    0.006624] CPU: Virtualization extensions available.
  1767. [    0.007517] devtmpfs: initialized
  1768. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  1769. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  1770. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  1771. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  1772. [    0.019239] pinctrl core: initialized pinctrl subsystem
  1773. [    0.020035] NET: Registered protocol family 16
  1774. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  1775. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  1776. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  1777. [    0.027705] Serial: AMBA PL011 UART driver
  1778. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  1779. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  1780. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  1781. [    0.062999] SCSI subsystem initialized
  1782. [    0.063243] usbcore: registered new interface driver usbfs
  1783. [    0.063313] usbcore: registered new interface driver hub
  1784. [    0.063412] usbcore: registered new device driver usb
  1785. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  1786. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  1787. [    0.147950] VFS: Disk quotas dquot_6.6.0
  1788. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1789. [    0.148263] FS-Cache: Loaded
  1790. [    0.148478] CacheFiles: Loaded
  1791. [    0.157380] NET: Registered protocol family 2
  1792. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  1793. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  1794. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  1795. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  1796. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1797. [    0.158896] NET: Registered protocol family 1
  1798. [    0.159368] RPC: Registered named UNIX socket transport module.
  1799. [    0.159391] RPC: Registered udp transport module.
  1800. [    0.159410] RPC: Registered tcp transport module.
  1801. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1802. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  1803. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  1804. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  1805. [    0.172478] NFS: Registering the id_resolver key type
  1806. [    0.172520] Key type id_resolver registered
  1807. [    0.172540] Key type id_legacy registered
  1808. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  1809. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  1810. [    0.174673] io scheduler noop registered
  1811. [    0.174695] io scheduler deadline registered (default)
  1812. [    0.174990] io scheduler cfq registered
  1813. [    0.175012] io scheduler mq-deadline registered
  1814. [    0.175031] io scheduler kyber registered
  1815. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  1816. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  1817. [    0.227300] Console: switching to colour frame buffer device 228x61
  1818. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  1819. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  1820. [    0.258635] vc-sm: Videocore shared memory driver
  1821. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  1822. [    0.269016] brd: module loaded
  1823. [    0.278107] loop: module loaded
  1824. [    0.278242] Loading iSCSI transport class v2.0-870.
  1825. [    0.279078] libphy: Fixed MDIO Bus: probed
  1826. [    0.279307] usbcore: registered new interface driver lan78xx
  1827. [    0.279522] usbcore: registered new interface driver smsc95xx
  1828. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  1829. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  1830. [    0.508094] Core Release: 2.80a
  1831. [    0.508197] Setting default values for core params
  1832. [    0.508357] Finished setting default values for core params
  1833. [    0.708753] Using Buffer DMA mode
  1834. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  1835. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  1836. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  1837. [    0.709303] Dedicated Tx FIFOs mode
  1838. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  1839. [    0.710130] FIQ FSM acceleration enabled for :
  1840.                Non-periodic Split Transactions
  1841.                Periodic Split Transactions
  1842.                High-Speed Isochronous Endpoints
  1843.                Interrupt/Control Split Transaction hack enabled
  1844. [    0.717507] dwc_otg: Microframe scheduler enabled
  1845. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  1846. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  1847. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  1848. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  1849. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  1850. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  1851. [    0.758539] Init: Port Power? op_state=1
  1852. [    0.765249] Init: Power Port (0)
  1853. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1854. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1855. [    0.785776] usb usb1: Product: DWC OTG Controller
  1856. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  1857. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  1858. [    0.806865] hub 1-0:1.0: USB hub found
  1859. [    0.813545] hub 1-0:1.0: 1 port detected
  1860. [    0.820654] dwc_otg: FIQ enabled
  1861. [    0.820659] dwc_otg: NAK holdoff enabled
  1862. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  1863. [    0.820673] Module dwc_common_port init
  1864. [    0.820914] usbcore: registered new interface driver usb-storage
  1865. [    0.827718] mousedev: PS/2 mouse device common for all mice
  1866. [    0.834488] IR NEC protocol handler initialized
  1867. [    0.841176] IR RC5(x/sz) protocol handler initialized
  1868. [    0.847845] IR RC6 protocol handler initialized
  1869. [    0.854476] IR JVC protocol handler initialized
  1870. [    0.860890] IR Sony protocol handler initialized
  1871. [    0.867378] IR SANYO protocol handler initialized
  1872. [    0.873888] IR Sharp protocol handler initialized
  1873. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  1874. [    0.886812] IR XMP protocol handler initialized
  1875. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  1876. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  1877. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  1878. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  1879. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  1880. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  1881. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  1882. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  1883. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  1884. [    0.957805] usbcore: registered new interface driver usbhid
  1885. [    0.964417] usbhid: USB HID core driver
  1886. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  1887. [    0.979914] [vc_sm_connected_init]: start
  1888. [    0.990138] [vc_sm_connected_init]: end - returning 0
  1889. [    0.997465] Initializing XFRM netlink socket
  1890. [    1.004189] NET: Registered protocol family 17
  1891. [    1.010919] Key type dns_resolver registered
  1892. [    1.018033] Registering SWP/SWPB emulation handler
  1893. [    1.025266] registered taskstats version 1
  1894. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  1895. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  1896. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  1897. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  1898. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  1899. [    1.126990] random: fast init done
  1900. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  1901. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  1902. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  1903. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  1904. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  1905. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  1906. [    1.228913] of_cfs_init
  1907. [    1.235507] of_cfs_init: OK
  1908. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  1909. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  1910. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  1911. [    1.296877] mmc1: new high speed SDIO card at address 0001
  1912. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  1913. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  1914. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  1915. [    1.390149]  mmcblk0: p1 p2
  1916. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  1917. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  1918. [    1.448622] devtmpfs: mounted
  1919. [    1.458366] Freeing unused kernel memory: 1024K
  1920. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  1921. [    1.481908] NOHZ: local_softirq_pending 40
  1922. [    1.488516] NOHZ: local_softirq_pending 40
  1923. [    1.489639] NOHZ: local_softirq_pending 40
  1924. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1925. [    1.516700] hub 1-1:1.0: USB hub found
  1926. [    1.521779] NOHZ: local_softirq_pending 40
  1927. [    1.530176] NOHZ: local_softirq_pending 40
  1928. [    1.531774] NOHZ: local_softirq_pending 40
  1929. [    1.544356] hub 1-1:1.0: 4 ports detected
  1930. [    1.582047] NOHZ: local_softirq_pending 40
  1931. [    1.588672] NOHZ: local_softirq_pending 40
  1932. [    1.595057] NOHZ: local_softirq_pending 40
  1933. [    1.601388] NOHZ: local_softirq_pending 40
  1934. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  1935. [    1.924382] systemd[1]: System time before build time, advancing clock.
  1936. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  1937. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1938. [    2.015369] hub 1-1.1:1.0: USB hub found
  1939. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  1940. [    2.052192] NET: Registered protocol family 10
  1941. [    2.059497] Segment Routing with IPv6
  1942. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  1943. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  1944. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  1945. [    2.121472] systemd[1]: Detected architecture arm.
  1946. [    2.156106] systemd[1]: Set hostname to <darach>.
  1947. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  1948. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  1949. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  1950. [    2.622376] systemd[1]: Listening on udev Control Socket.
  1951. [    2.637651] systemd[1]: Listening on Journal Socket.
  1952. [    2.652846] systemd[1]: Created slice User and Session Slice.
  1953. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  1954. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1955. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  1956. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  1957. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  1958. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  1959. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1960. [    3.240965] libphy: lan78xx-mdiobus: probed
  1961. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  1962. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  1963. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  1964. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  1965. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  1966. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  1967. [    4.443078] usbcore: registered new interface driver brcmfmac
  1968. [    4.689993] random: crng init done
  1969. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  1970. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  1971. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  1972. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  1973. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1974. [    5.924523] brcmfmac: power management disabled
  1975. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  1976. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1977. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1978. [   12.020101] Bluetooth: Core ver 2.22
  1979. [   12.020160] NET: Registered protocol family 31
  1980. [   12.020163] Bluetooth: HCI device and connection manager initialized
  1981. [   12.020178] Bluetooth: HCI socket layer initialized
  1982. [   12.020185] Bluetooth: L2CAP socket layer initialized
  1983. [   12.020206] Bluetooth: SCO socket layer initialized
  1984. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  1985. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  1986. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1987. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  1988. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1989. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  1990. [   12.347349] Bluetooth: BNEP socket layer initialized
  1991. kevin@darach:/dev $ dmesg /q phrik ptpb
  1992.  
  1993. Usage:
  1994.  dmesg [options]
  1995.  
  1996. Display or control the kernel ring buffer.
  1997.  
  1998. Options:
  1999.  -C, --clear                 clear the kernel ring buffer
  2000.  -c, --read-clear            read and clear all messages
  2001.  -D, --console-off           disable printing messages to console
  2002.  -E, --console-on            enable printing messages to console
  2003.  -F, --file <file>           use the file instead of the kernel log buffer
  2004.  -f, --facility <list>       restrict output to defined facilities
  2005.  -H, --human                 human readable output
  2006.  -k, --kernel                display kernel messages
  2007.  -L, --color[=<when>]        colorize messages (auto, always or never)
  2008.                                colors are enabled by default
  2009.  -l, --level <list>          restrict output to defined levels
  2010.  -n, --console-level <level> set level of messages printed to console
  2011.  -P, --nopager               do not pipe output into a pager
  2012.  -r, --raw                   print the raw message buffer
  2013.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  2014.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  2015.  -u, --userspace             display userspace messages
  2016.  -w, --follow                wait for new messages
  2017.  -x, --decode                decode facility and level to readable string
  2018.  -d, --show-delta            show time delta between printed messages
  2019.  -e, --reltime               show local time and time delta in readable format
  2020.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  2021.  -t, --notime                don't show any timestamp with messages
  2022.      --time-format <format>  show timestamp using the given format:
  2023.                                [delta|reltime|ctime|notime|iso]
  2024. Suspending/resume will make ctime and iso timestamps inaccurate.
  2025.  
  2026.  -h, --help     display this help and exit
  2027.  -V, --version  output version information and exit
  2028.  
  2029. Supported log facilities:
  2030.     kern - kernel messages
  2031.     user - random user-level messages
  2032.     mail - mail system
  2033.   daemon - system daemons
  2034.     auth - security/authorization messages
  2035.   syslog - messages generated internally by syslogd
  2036.      lpr - line printer subsystem
  2037.     news - network news subsystem
  2038.  
  2039. Supported log levels (priorities):
  2040.    emerg - system is unusable
  2041.    alert - action must be taken immediately
  2042.     crit - critical conditions
  2043.      err - error conditions
  2044.     warn - warning conditions
  2045.   notice - normal but significant condition
  2046.     info - informational
  2047.    debug - debug-level messages
  2048.  
  2049.  
  2050. For more details see dmesg(1).
  2051. kevin@darach:/dev $ dmesg > message.txt
  2052. -bash: message.txt: Toegang geweigerd
  2053. kevin@darach:/dev $ cd
  2054. kevin@darach:~ $ dmesg > message.txt
  2055. kevin@darach:~ $ nano message.txt
  2056. kevin@darach:~ $ vi message.txt
  2057. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2058. [    0.785776] usb usb1: Product: DWC OTG Controller
  2059. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  2060. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  2061. [    0.806865] hub 1-0:1.0: USB hub found
  2062. [    0.813545] hub 1-0:1.0: 1 port detected
  2063. [    0.820654] dwc_otg: FIQ enabled
  2064. [    0.820659] dwc_otg: NAK holdoff enabled
  2065. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  2066. [    0.820673] Module dwc_common_port init
  2067. [    0.820914] usbcore: registered new interface driver usb-storage
  2068. [    0.827718] mousedev: PS/2 mouse device common for all mice
  2069. [    0.834488] IR NEC protocol handler initialized
  2070. [    0.841176] IR RC5(x/sz) protocol handler initialized
  2071. [    0.847845] IR RC6 protocol handler initialized
  2072. [    0.854476] IR JVC protocol handler initialized
  2073. [    0.860890] IR Sony protocol handler initialized
  2074. [    0.867378] IR SANYO protocol handler initialized
  2075. [    0.873888] IR Sharp protocol handler initialized
  2076. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  2077. [    0.886812] IR XMP protocol handler initialized
  2078. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  2079. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  2080. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  2081. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  2082. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  2083. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  2084. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  2085. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  2086. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  2087. [    0.957805] usbcore: registered new interface driver usbhid
  2088. [    0.964417] usbhid: USB HID core driver
  2089. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  2090. [    0.979914] [vc_sm_connected_init]: start
  2091. [    0.990138] [vc_sm_connected_init]: end - returning 0
  2092. [    0.997465] Initializing XFRM netlink socket
  2093. [    1.004189] NET: Registered protocol family 17
  2094. [    1.010919] Key type dns_resolver registered
  2095. [    3.240965] libphy: lan78xx-mdiobus: probed
  2096. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  2097. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  2098. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  2099. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  2100. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  2101. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  2102. [    4.443078] usbcore: registered new interface driver brcmfmac
  2103. [    4.689993] random: crng init done
  2104. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  2105. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  2106. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  2107. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  2108. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  2109. [    5.924523] brcmfmac: power management disabled
  2110. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  2111. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2112. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  2113. [   12.020101] Bluetooth: Core ver 2.22
  2114. [   12.020160] NET: Registered protocol family 31
  2115. [   12.020163] Bluetooth: HCI device and connection manager initialized
  2116. [   12.020178] Bluetooth: HCI socket layer initialized
  2117. [   12.020185] Bluetooth: L2CAP socket layer initialized
  2118. [   12.020206] Bluetooth: SCO socket layer initialized
  2119. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  2120. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  2121. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  2122. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  2123. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2124. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  2125. [   12.347349] Bluetooth: BNEP socket layer initialized
  2126. kevin@darach:/dev $ clear
  2127. kevin@darach:/dev $ dmesg
  2128. [    0.000000] Booting Linux on physical CPU 0x0
  2129. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  2130. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  2131. [    0.000000] CPU: div instructions available: patching division code
  2132. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  2133. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  2134. [    0.000000] Memory policy: Data cache writealloc
  2135. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  2136. [    0.000000] On node 0 totalpages: 242688
  2137. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  2138. [    0.000000]   Normal zone: 2133 pages used for memmap
  2139. [    0.000000]   Normal zone: 0 pages reserved
  2140. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  2141. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  2142. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  2143. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  2144. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  2145. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  2146. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  2147. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  2148. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  2149. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  2150. [    0.000000] Virtual kernel memory layout:
  2151.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  2152.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  2153.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  2154.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  2155.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  2156.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  2157.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  2158.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  2159.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  2160. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  2161. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  2162. [    0.000000] Hierarchical RCU implementation.
  2163. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  2164. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  2165. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  2166. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  2167. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  2168. [    0.000274] Console: colour dummy device 80x30
  2169. [    0.000806] console [tty1] enabled
  2170. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  2171. [    0.000883] pid_max: default: 32768 minimum: 301
  2172. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  2173. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  2174. [    0.002201] Disabling memory control group subsystem
  2175. [    0.002294] CPU: Testing write buffer coherency: ok
  2176. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  2177. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  2178. [    0.003272] Hierarchical SRCU implementation.
  2179. [    0.003964] smp: Bringing up secondary CPUs ...
  2180. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  2181. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  2182. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  2183. [    0.006513] smp: Brought up 1 node, 4 CPUs
  2184. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  2185. [    0.006606] CPU: All CPU(s) started in HYP mode.
  2186. [    0.006624] CPU: Virtualization extensions available.
  2187. [    0.007517] devtmpfs: initialized
  2188. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  2189. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  2190. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  2191. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  2192. [    0.019239] pinctrl core: initialized pinctrl subsystem
  2193. [    0.020035] NET: Registered protocol family 16
  2194. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  2195. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  2196. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  2197. [    0.027705] Serial: AMBA PL011 UART driver
  2198. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  2199. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  2200. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  2201. [    0.062999] SCSI subsystem initialized
  2202. [    0.063243] usbcore: registered new interface driver usbfs
  2203. [    0.063313] usbcore: registered new interface driver hub
  2204. [    0.063412] usbcore: registered new device driver usb
  2205. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  2206. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  2207. [    0.147950] VFS: Disk quotas dquot_6.6.0
  2208. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  2209. [    0.148263] FS-Cache: Loaded
  2210. [    0.148478] CacheFiles: Loaded
  2211. [    0.157380] NET: Registered protocol family 2
  2212. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  2213. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  2214. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  2215. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  2216. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  2217. [    0.158896] NET: Registered protocol family 1
  2218. [    0.159368] RPC: Registered named UNIX socket transport module.
  2219. [    0.159391] RPC: Registered udp transport module.
  2220. [    0.159410] RPC: Registered tcp transport module.
  2221. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2222. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  2223. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  2224. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  2225. [    0.172478] NFS: Registering the id_resolver key type
  2226. [    0.172520] Key type id_resolver registered
  2227. [    0.172540] Key type id_legacy registered
  2228. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  2229. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  2230. [    0.174673] io scheduler noop registered
  2231. [    0.174695] io scheduler deadline registered (default)
  2232. [    0.174990] io scheduler cfq registered
  2233. [    0.175012] io scheduler mq-deadline registered
  2234. [    0.175031] io scheduler kyber registered
  2235. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  2236. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  2237. [    0.227300] Console: switching to colour frame buffer device 228x61
  2238. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  2239. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  2240. [    0.258635] vc-sm: Videocore shared memory driver
  2241. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  2242. [    0.269016] brd: module loaded
  2243. [    0.278107] loop: module loaded
  2244. [    0.278242] Loading iSCSI transport class v2.0-870.
  2245. [    0.279078] libphy: Fixed MDIO Bus: probed
  2246. [    0.279307] usbcore: registered new interface driver lan78xx
  2247. [    0.279522] usbcore: registered new interface driver smsc95xx
  2248. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  2249. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  2250. [    0.508094] Core Release: 2.80a
  2251. [    0.508197] Setting default values for core params
  2252. [    0.508357] Finished setting default values for core params
  2253. [    0.708753] Using Buffer DMA mode
  2254. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  2255. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  2256. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  2257. [    0.709303] Dedicated Tx FIFOs mode
  2258. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  2259. [    0.710130] FIQ FSM acceleration enabled for :
  2260.                Non-periodic Split Transactions
  2261.                Periodic Split Transactions
  2262.                High-Speed Isochronous Endpoints
  2263.                Interrupt/Control Split Transaction hack enabled
  2264. [    0.717507] dwc_otg: Microframe scheduler enabled
  2265. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  2266. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  2267. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  2268. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  2269. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  2270. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  2271. [    0.758539] Init: Port Power? op_state=1
  2272. [    0.765249] Init: Power Port (0)
  2273. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  2274. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2275. [    0.785776] usb usb1: Product: DWC OTG Controller
  2276. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  2277. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  2278. [    0.806865] hub 1-0:1.0: USB hub found
  2279. [    0.813545] hub 1-0:1.0: 1 port detected
  2280. [    0.820654] dwc_otg: FIQ enabled
  2281. [    0.820659] dwc_otg: NAK holdoff enabled
  2282. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  2283. [    0.820673] Module dwc_common_port init
  2284. [    0.820914] usbcore: registered new interface driver usb-storage
  2285. [    0.827718] mousedev: PS/2 mouse device common for all mice
  2286. [    0.834488] IR NEC protocol handler initialized
  2287. [    0.841176] IR RC5(x/sz) protocol handler initialized
  2288. [    0.847845] IR RC6 protocol handler initialized
  2289. [    0.854476] IR JVC protocol handler initialized
  2290. [    0.860890] IR Sony protocol handler initialized
  2291. [    0.867378] IR SANYO protocol handler initialized
  2292. [    0.873888] IR Sharp protocol handler initialized
  2293. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  2294. [    0.886812] IR XMP protocol handler initialized
  2295. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  2296. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  2297. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  2298. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  2299. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  2300. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  2301. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  2302. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  2303. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  2304. [    0.957805] usbcore: registered new interface driver usbhid
  2305. [    0.964417] usbhid: USB HID core driver
  2306. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  2307. [    0.979914] [vc_sm_connected_init]: start
  2308. [    0.990138] [vc_sm_connected_init]: end - returning 0
  2309. [    0.997465] Initializing XFRM netlink socket
  2310. [    1.004189] NET: Registered protocol family 17
  2311. [    1.010919] Key type dns_resolver registered
  2312. [    1.018033] Registering SWP/SWPB emulation handler
  2313. [    1.025266] registered taskstats version 1
  2314. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  2315. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  2316. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  2317. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  2318. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  2319. [    1.126990] random: fast init done
  2320. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  2321. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  2322. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  2323. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  2324. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  2325. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  2326. [    1.228913] of_cfs_init
  2327. [    1.235507] of_cfs_init: OK
  2328. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  2329. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  2330. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  2331. [    1.296877] mmc1: new high speed SDIO card at address 0001
  2332. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  2333. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  2334. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  2335. [    1.390149]  mmcblk0: p1 p2
  2336. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  2337. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  2338. [    1.448622] devtmpfs: mounted
  2339. [    1.458366] Freeing unused kernel memory: 1024K
  2340. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  2341. [    1.481908] NOHZ: local_softirq_pending 40
  2342. [    1.488516] NOHZ: local_softirq_pending 40
  2343. [    1.489639] NOHZ: local_softirq_pending 40
  2344. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2345. [    1.516700] hub 1-1:1.0: USB hub found
  2346. [    1.521779] NOHZ: local_softirq_pending 40
  2347. [    1.530176] NOHZ: local_softirq_pending 40
  2348. [    1.531774] NOHZ: local_softirq_pending 40
  2349. [    1.544356] hub 1-1:1.0: 4 ports detected
  2350. [    1.582047] NOHZ: local_softirq_pending 40
  2351. [    1.588672] NOHZ: local_softirq_pending 40
  2352. [    1.595057] NOHZ: local_softirq_pending 40
  2353. [    1.601388] NOHZ: local_softirq_pending 40
  2354. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  2355. [    1.924382] systemd[1]: System time before build time, advancing clock.
  2356. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  2357. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2358. [    2.015369] hub 1-1.1:1.0: USB hub found
  2359. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  2360. [    2.052192] NET: Registered protocol family 10
  2361. [    2.059497] Segment Routing with IPv6
  2362. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  2363. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  2364. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  2365. [    2.121472] systemd[1]: Detected architecture arm.
  2366. [    2.156106] systemd[1]: Set hostname to <darach>.
  2367. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  2368. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  2369. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  2370. [    2.622376] systemd[1]: Listening on udev Control Socket.
  2371. [    2.637651] systemd[1]: Listening on Journal Socket.
  2372. [    2.652846] systemd[1]: Created slice User and Session Slice.
  2373. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  2374. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  2375. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  2376. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  2377. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  2378. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  2379. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2380. [    3.240965] libphy: lan78xx-mdiobus: probed
  2381. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  2382. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  2383. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  2384. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  2385. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  2386. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  2387. [    4.443078] usbcore: registered new interface driver brcmfmac
  2388. [    4.689993] random: crng init done
  2389. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  2390. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  2391. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  2392. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  2393. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  2394. [    5.924523] brcmfmac: power management disabled
  2395. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  2396. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2397. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  2398. [   12.020101] Bluetooth: Core ver 2.22
  2399. [   12.020160] NET: Registered protocol family 31
  2400. [   12.020163] Bluetooth: HCI device and connection manager initialized
  2401. [   12.020178] Bluetooth: HCI socket layer initialized
  2402. [   12.020185] Bluetooth: L2CAP socket layer initialized
  2403. [   12.020206] Bluetooth: SCO socket layer initialized
  2404. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  2405. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  2406. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  2407. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  2408. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2409. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  2410. [   12.347349] Bluetooth: BNEP socket layer initialized
  2411. kevin@darach:/dev $ dmesg /q phrik ptpb
  2412.  
  2413. Usage:
  2414.  dmesg [options]
  2415.  
  2416. Display or control the kernel ring buffer.
  2417.  
  2418. Options:
  2419.  -C, --clear                 clear the kernel ring buffer
  2420.  -c, --read-clear            read and clear all messages
  2421.  -D, --console-off           disable printing messages to console
  2422.  -E, --console-on            enable printing messages to console
  2423.  -F, --file <file>           use the file instead of the kernel log buffer
  2424.  -f, --facility <list>       restrict output to defined facilities
  2425.  -H, --human                 human readable output
  2426.  -k, --kernel                display kernel messages
  2427.  -L, --color[=<when>]        colorize messages (auto, always or never)
  2428.                                colors are enabled by default
  2429.  -l, --level <list>          restrict output to defined levels
  2430.  -n, --console-level <level> set level of messages printed to console
  2431.  -P, --nopager               do not pipe output into a pager
  2432.  -r, --raw                   print the raw message buffer
  2433.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  2434.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  2435.  -u, --userspace             display userspace messages
  2436.  -w, --follow                wait for new messages
  2437.  -x, --decode                decode facility and level to readable string
  2438.  -d, --show-delta            show time delta between printed messages
  2439.  -e, --reltime               show local time and time delta in readable format
  2440.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  2441.  -t, --notime                don't show any timestamp with messages
  2442.      --time-format <format>  show timestamp using the given format:
  2443.                                [delta|reltime|ctime|notime|iso]
  2444. Suspending/resume will make ctime and iso timestamps inaccurate.
  2445.  
  2446.  -h, --help     display this help and exit
  2447.  -V, --version  output version information and exit
  2448.  
  2449. Supported log facilities:
  2450.     kern - kernel messages
  2451.     user - random user-level messages
  2452.     mail - mail system
  2453.   daemon - system daemons
  2454.     auth - security/authorization messages
  2455.   syslog - messages generated internally by syslogd
  2456.      lpr - line printer subsystem
  2457.     news - network news subsystem
  2458.  
  2459. Supported log levels (priorities):
  2460.    emerg - system is unusable
  2461.    alert - action must be taken immediately
  2462.     crit - critical conditions
  2463.      err - error conditions
  2464.     warn - warning conditions
  2465.   notice - normal but significant condition
  2466.     info - informational
  2467.    debug - debug-level messages
  2468.  
  2469.  
  2470. For more details see dmesg(1).
  2471. kevin@darach:/dev $ dmesg > message.txt
  2472. -bash: message.txt: Toegang geweigerd
  2473. kevin@darach:/dev $ cd
  2474. kevin@darach:~ $ dmesg > message.txt
  2475. kevin@darach:~ $ nano message.txt
  2476. kevin@darach:~ $ vi message.txt
  2477. [    1.018033] Registering SWP/SWPB emulation handler
  2478. [    1.025266] registered taskstats version 1
  2479. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  2480. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  2481. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  2482. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  2483. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  2484. [    1.126990] random: fast init done
  2485. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  2486. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  2487. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  2488. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  2489. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  2490. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  2491. [    1.228913] of_cfs_init
  2492. [    1.235507] of_cfs_init: OK
  2493. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  2494. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  2495. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  2496. [    1.296877] mmc1: new high speed SDIO card at address 0001
  2497. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  2498. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  2499. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  2500. [    1.390149]  mmcblk0: p1 p2
  2501. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  2502. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  2503. [    1.448622] devtmpfs: mounted
  2504. [    1.458366] Freeing unused kernel memory: 1024K
  2505. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  2506. [    1.481908] NOHZ: local_softirq_pending 40
  2507. [    1.488516] NOHZ: local_softirq_pending 40
  2508. [    1.489639] NOHZ: local_softirq_pending 40
  2509. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2510. [    1.516700] hub 1-1:1.0: USB hub found
  2511. [    1.521779] NOHZ: local_softirq_pending 40
  2512. [    1.530176] NOHZ: local_softirq_pending 40
  2513. [    1.531774] NOHZ: local_softirq_pending 40
  2514. [    1.544356] hub 1-1:1.0: 4 ports detected
  2515. [    3.240965] libphy: lan78xx-mdiobus: probed
  2516. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  2517. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  2518. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  2519. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  2520. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  2521. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  2522. [    4.443078] usbcore: registered new interface driver brcmfmac
  2523. [    4.689993] random: crng init done
  2524. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  2525. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  2526. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  2527. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  2528. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  2529. [    5.924523] brcmfmac: power management disabled
  2530. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  2531. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2532. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  2533. [   12.020101] Bluetooth: Core ver 2.22
  2534. [   12.020160] NET: Registered protocol family 31
  2535. [   12.020163] Bluetooth: HCI device and connection manager initialized
  2536. [   12.020178] Bluetooth: HCI socket layer initialized
  2537. [   12.020185] Bluetooth: L2CAP socket layer initialized
  2538. [   12.020206] Bluetooth: SCO socket layer initialized
  2539. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  2540. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  2541. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  2542. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  2543. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2544. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  2545. [   12.347349] Bluetooth: BNEP socket layer initialized
  2546. kevin@darach:/dev $ clear
  2547. kevin@darach:/dev $ dmesg
  2548. [    0.000000] Booting Linux on physical CPU 0x0
  2549. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  2550. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  2551. [    0.000000] CPU: div instructions available: patching division code
  2552. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  2553. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  2554. [    0.000000] Memory policy: Data cache writealloc
  2555. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  2556. [    0.000000] On node 0 totalpages: 242688
  2557. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  2558. [    0.000000]   Normal zone: 2133 pages used for memmap
  2559. [    0.000000]   Normal zone: 0 pages reserved
  2560. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  2561. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  2562. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  2563. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  2564. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  2565. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  2566. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  2567. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  2568. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  2569. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  2570. [    0.000000] Virtual kernel memory layout:
  2571.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  2572.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  2573.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  2574.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  2575.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  2576.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  2577.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  2578.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  2579.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  2580. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  2581. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  2582. [    0.000000] Hierarchical RCU implementation.
  2583. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  2584. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  2585. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  2586. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  2587. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  2588. [    0.000274] Console: colour dummy device 80x30
  2589. [    0.000806] console [tty1] enabled
  2590. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  2591. [    0.000883] pid_max: default: 32768 minimum: 301
  2592. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  2593. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  2594. [    0.002201] Disabling memory control group subsystem
  2595. [    0.002294] CPU: Testing write buffer coherency: ok
  2596. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  2597. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  2598. [    0.003272] Hierarchical SRCU implementation.
  2599. [    0.003964] smp: Bringing up secondary CPUs ...
  2600. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  2601. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  2602. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  2603. [    0.006513] smp: Brought up 1 node, 4 CPUs
  2604. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  2605. [    0.006606] CPU: All CPU(s) started in HYP mode.
  2606. [    0.006624] CPU: Virtualization extensions available.
  2607. [    0.007517] devtmpfs: initialized
  2608. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  2609. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  2610. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  2611. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  2612. [    0.019239] pinctrl core: initialized pinctrl subsystem
  2613. [    0.020035] NET: Registered protocol family 16
  2614. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  2615. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  2616. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  2617. [    0.027705] Serial: AMBA PL011 UART driver
  2618. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  2619. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  2620. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  2621. [    0.062999] SCSI subsystem initialized
  2622. [    0.063243] usbcore: registered new interface driver usbfs
  2623. [    0.063313] usbcore: registered new interface driver hub
  2624. [    0.063412] usbcore: registered new device driver usb
  2625. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  2626. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  2627. [    0.147950] VFS: Disk quotas dquot_6.6.0
  2628. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  2629. [    0.148263] FS-Cache: Loaded
  2630. [    0.148478] CacheFiles: Loaded
  2631. [    0.157380] NET: Registered protocol family 2
  2632. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  2633. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  2634. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  2635. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  2636. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  2637. [    0.158896] NET: Registered protocol family 1
  2638. [    0.159368] RPC: Registered named UNIX socket transport module.
  2639. [    0.159391] RPC: Registered udp transport module.
  2640. [    0.159410] RPC: Registered tcp transport module.
  2641. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2642. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  2643. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  2644. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  2645. [    0.172478] NFS: Registering the id_resolver key type
  2646. [    0.172520] Key type id_resolver registered
  2647. [    0.172540] Key type id_legacy registered
  2648. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  2649. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  2650. [    0.174673] io scheduler noop registered
  2651. [    0.174695] io scheduler deadline registered (default)
  2652. [    0.174990] io scheduler cfq registered
  2653. [    0.175012] io scheduler mq-deadline registered
  2654. [    0.175031] io scheduler kyber registered
  2655. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  2656. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  2657. [    0.227300] Console: switching to colour frame buffer device 228x61
  2658. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  2659. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  2660. [    0.258635] vc-sm: Videocore shared memory driver
  2661. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  2662. [    0.269016] brd: module loaded
  2663. [    0.278107] loop: module loaded
  2664. [    0.278242] Loading iSCSI transport class v2.0-870.
  2665. [    0.279078] libphy: Fixed MDIO Bus: probed
  2666. [    0.279307] usbcore: registered new interface driver lan78xx
  2667. [    0.279522] usbcore: registered new interface driver smsc95xx
  2668. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  2669. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  2670. [    0.508094] Core Release: 2.80a
  2671. [    0.508197] Setting default values for core params
  2672. [    0.508357] Finished setting default values for core params
  2673. [    0.708753] Using Buffer DMA mode
  2674. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  2675. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  2676. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  2677. [    0.709303] Dedicated Tx FIFOs mode
  2678. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  2679. [    0.710130] FIQ FSM acceleration enabled for :
  2680.                Non-periodic Split Transactions
  2681.                Periodic Split Transactions
  2682.                High-Speed Isochronous Endpoints
  2683.                Interrupt/Control Split Transaction hack enabled
  2684. [    0.717507] dwc_otg: Microframe scheduler enabled
  2685. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  2686. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  2687. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  2688. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  2689. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  2690. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  2691. [    0.758539] Init: Port Power? op_state=1
  2692. [    0.765249] Init: Power Port (0)
  2693. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  2694. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2695. [    0.785776] usb usb1: Product: DWC OTG Controller
  2696. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  2697. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  2698. [    0.806865] hub 1-0:1.0: USB hub found
  2699. [    0.813545] hub 1-0:1.0: 1 port detected
  2700. [    0.820654] dwc_otg: FIQ enabled
  2701. [    0.820659] dwc_otg: NAK holdoff enabled
  2702. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  2703. [    0.820673] Module dwc_common_port init
  2704. [    0.820914] usbcore: registered new interface driver usb-storage
  2705. [    0.827718] mousedev: PS/2 mouse device common for all mice
  2706. [    0.834488] IR NEC protocol handler initialized
  2707. [    0.841176] IR RC5(x/sz) protocol handler initialized
  2708. [    0.847845] IR RC6 protocol handler initialized
  2709. [    0.854476] IR JVC protocol handler initialized
  2710. [    0.860890] IR Sony protocol handler initialized
  2711. [    0.867378] IR SANYO protocol handler initialized
  2712. [    0.873888] IR Sharp protocol handler initialized
  2713. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  2714. [    0.886812] IR XMP protocol handler initialized
  2715. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  2716. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  2717. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  2718. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  2719. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  2720. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  2721. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  2722. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  2723. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  2724. [    0.957805] usbcore: registered new interface driver usbhid
  2725. [    0.964417] usbhid: USB HID core driver
  2726. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  2727. [    0.979914] [vc_sm_connected_init]: start
  2728. [    0.990138] [vc_sm_connected_init]: end - returning 0
  2729. [    0.997465] Initializing XFRM netlink socket
  2730. [    1.004189] NET: Registered protocol family 17
  2731. [    1.010919] Key type dns_resolver registered
  2732. [    1.018033] Registering SWP/SWPB emulation handler
  2733. [    1.025266] registered taskstats version 1
  2734. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  2735. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  2736. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  2737. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  2738. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  2739. [    1.126990] random: fast init done
  2740. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  2741. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  2742. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  2743. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  2744. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  2745. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  2746. [    1.228913] of_cfs_init
  2747. [    1.235507] of_cfs_init: OK
  2748. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  2749. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  2750. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  2751. [    1.296877] mmc1: new high speed SDIO card at address 0001
  2752. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  2753. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  2754. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  2755. [    1.390149]  mmcblk0: p1 p2
  2756. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  2757. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  2758. [    1.448622] devtmpfs: mounted
  2759. [    1.458366] Freeing unused kernel memory: 1024K
  2760. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  2761. [    1.481908] NOHZ: local_softirq_pending 40
  2762. [    1.488516] NOHZ: local_softirq_pending 40
  2763. [    1.489639] NOHZ: local_softirq_pending 40
  2764. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2765. [    1.516700] hub 1-1:1.0: USB hub found
  2766. [    1.521779] NOHZ: local_softirq_pending 40
  2767. [    1.530176] NOHZ: local_softirq_pending 40
  2768. [    1.531774] NOHZ: local_softirq_pending 40
  2769. [    1.544356] hub 1-1:1.0: 4 ports detected
  2770. [    1.582047] NOHZ: local_softirq_pending 40
  2771. [    1.588672] NOHZ: local_softirq_pending 40
  2772. [    1.595057] NOHZ: local_softirq_pending 40
  2773. [    1.601388] NOHZ: local_softirq_pending 40
  2774. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  2775. [    1.924382] systemd[1]: System time before build time, advancing clock.
  2776. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  2777. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2778. [    2.015369] hub 1-1.1:1.0: USB hub found
  2779. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  2780. [    2.052192] NET: Registered protocol family 10
  2781. [    2.059497] Segment Routing with IPv6
  2782. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  2783. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  2784. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  2785. [    2.121472] systemd[1]: Detected architecture arm.
  2786. [    2.156106] systemd[1]: Set hostname to <darach>.
  2787. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  2788. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  2789. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  2790. [    2.622376] systemd[1]: Listening on udev Control Socket.
  2791. [    2.637651] systemd[1]: Listening on Journal Socket.
  2792. [    2.652846] systemd[1]: Created slice User and Session Slice.
  2793. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  2794. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  2795. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  2796. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  2797. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  2798. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  2799. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2800. [    3.240965] libphy: lan78xx-mdiobus: probed
  2801. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  2802. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  2803. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  2804. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  2805. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  2806. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  2807. [    4.443078] usbcore: registered new interface driver brcmfmac
  2808. [    4.689993] random: crng init done
  2809. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  2810. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  2811. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  2812. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  2813. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  2814. [    5.924523] brcmfmac: power management disabled
  2815. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  2816. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2817. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  2818. [   12.020101] Bluetooth: Core ver 2.22
  2819. [   12.020160] NET: Registered protocol family 31
  2820. [   12.020163] Bluetooth: HCI device and connection manager initialized
  2821. [   12.020178] Bluetooth: HCI socket layer initialized
  2822. [   12.020185] Bluetooth: L2CAP socket layer initialized
  2823. [   12.020206] Bluetooth: SCO socket layer initialized
  2824. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  2825. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  2826. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  2827. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  2828. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2829. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  2830. [   12.347349] Bluetooth: BNEP socket layer initialized
  2831. kevin@darach:/dev $ dmesg /q phrik ptpb
  2832.  
  2833. Usage:
  2834.  dmesg [options]
  2835.  
  2836. Display or control the kernel ring buffer.
  2837.  
  2838. Options:
  2839.  -C, --clear                 clear the kernel ring buffer
  2840.  -c, --read-clear            read and clear all messages
  2841.  -D, --console-off           disable printing messages to console
  2842.  -E, --console-on            enable printing messages to console
  2843.  -F, --file <file>           use the file instead of the kernel log buffer
  2844.  -f, --facility <list>       restrict output to defined facilities
  2845.  -H, --human                 human readable output
  2846.  -k, --kernel                display kernel messages
  2847.  -L, --color[=<when>]        colorize messages (auto, always or never)
  2848.                                colors are enabled by default
  2849.  -l, --level <list>          restrict output to defined levels
  2850.  -n, --console-level <level> set level of messages printed to console
  2851.  -P, --nopager               do not pipe output into a pager
  2852.  -r, --raw                   print the raw message buffer
  2853.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  2854.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  2855.  -u, --userspace             display userspace messages
  2856.  -w, --follow                wait for new messages
  2857.  -x, --decode                decode facility and level to readable string
  2858.  -d, --show-delta            show time delta between printed messages
  2859.  -e, --reltime               show local time and time delta in readable format
  2860.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  2861.  -t, --notime                don't show any timestamp with messages
  2862.      --time-format <format>  show timestamp using the given format:
  2863.                                [delta|reltime|ctime|notime|iso]
  2864. Suspending/resume will make ctime and iso timestamps inaccurate.
  2865.  
  2866.  -h, --help     display this help and exit
  2867.  -V, --version  output version information and exit
  2868.  
  2869. Supported log facilities:
  2870.     kern - kernel messages
  2871.     user - random user-level messages
  2872.     mail - mail system
  2873.   daemon - system daemons
  2874.     auth - security/authorization messages
  2875.   syslog - messages generated internally by syslogd
  2876.      lpr - line printer subsystem
  2877.     news - network news subsystem
  2878.  
  2879. Supported log levels (priorities):
  2880.    emerg - system is unusable
  2881.    alert - action must be taken immediately
  2882.     crit - critical conditions
  2883.      err - error conditions
  2884.     warn - warning conditions
  2885.   notice - normal but significant condition
  2886.     info - informational
  2887.    debug - debug-level messages
  2888.  
  2889.  
  2890. For more details see dmesg(1).
  2891. kevin@darach:/dev $ dmesg > message.txt
  2892. -bash: message.txt: Toegang geweigerd
  2893. kevin@darach:/dev $ cd
  2894. kevin@darach:~ $ dmesg > message.txt
  2895. kevin@darach:~ $ nano message.txt
  2896. kevin@darach:~ $ vi message.txt
  2897. [    1.588672] NOHZ: local_softirq_pending 40
  2898. [    1.595057] NOHZ: local_softirq_pending 40
  2899. [    1.601388] NOHZ: local_softirq_pending 40
  2900. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  2901. [    1.924382] systemd[1]: System time before build time, advancing clock.
  2902. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  2903. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2904. [    2.015369] hub 1-1.1:1.0: USB hub found
  2905. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  2906. [    2.052192] NET: Registered protocol family 10
  2907. [    2.059497] Segment Routing with IPv6
  2908. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  2909. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  2910. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  2911. [    2.121472] systemd[1]: Detected architecture arm.
  2912. [    2.156106] systemd[1]: Set hostname to <darach>.
  2913. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  2914. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  2915. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  2916. [    2.622376] systemd[1]: Listening on udev Control Socket.
  2917. [    2.637651] systemd[1]: Listening on Journal Socket.
  2918. [    2.652846] systemd[1]: Created slice User and Session Slice.
  2919. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  2920. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  2921. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  2922. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  2923. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  2924. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  2925. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  2926. [    3.240965] libphy: lan78xx-mdiobus: probed
  2927. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  2928. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  2929. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  2930. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  2931. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  2932. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  2933. [    3.240965] libphy: lan78xx-mdiobus: probed
  2934. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  2935. [    3.587954] systemd-journald[113]: Received request to flush runtime journal                                         from PID 1
  2936. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is                                         unknown, you have been warned.
  2937. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  2938. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  2939. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdi                                        o.bin for chip 0x004345(17221) rev 0x000006
  2940. [    4.443078] usbcore: registered new interface driver brcmfmac
  2941. [    4.689993] random: crng init done
  2942. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  2943. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2                                        018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  2944. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.                                        10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  2945. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  2946. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  2947. [    5.924523] brcmfmac: power management disabled
  2948. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:1                                        02396k SSFS
  2949. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2950. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  2951. [   12.020101] Bluetooth: Core ver 2.22
  2952. [   12.020160] NET: Registered protocol family 31
  2953. [   12.020163] Bluetooth: HCI device and connection manager initialized
  2954. [   12.020178] Bluetooth: HCI socket layer initialized
  2955. [   12.020185] Bluetooth: L2CAP socket layer initialized
  2956. [   12.020206] Bluetooth: SCO socket layer initialized
  2957. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  2958. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  2959. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  2960. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  2961. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2962. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  2963. [   12.347349] Bluetooth: BNEP socket layer initialized
  2964. kevin@darach:/dev $ clear
  2965. kevin@darach:/dev $ dmesg
  2966. [    0.000000] Booting Linux on physical CPU 0x0
  2967. [    0.000000] Linux version 4.14.62-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1134 SMP Tue Aug 14 17:10:10 BST 2018
  2968. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  2969. [    0.000000] CPU: div instructions available: patching division code
  2970. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  2971. [    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
  2972. [    0.000000] Memory policy: Data cache writealloc
  2973. [    0.000000] cma: Reserved 8 MiB at 0x3ac00000
  2974. [    0.000000] On node 0 totalpages: 242688
  2975. [    0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba39f000
  2976. [    0.000000]   Normal zone: 2133 pages used for memmap
  2977. [    0.000000]   Normal zone: 0 pages reserved
  2978. [    0.000000]   Normal zone: 242688 pages, LIFO batch:31
  2979. [    0.000000] percpu: Embedded 17 pages/cpu @ba348000 s38720 r8192 d22720 u69632
  2980. [    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
  2981. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  2982. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
  2983. [    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a147cfd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  2984. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  2985. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  2986. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  2987. [    0.000000] Memory: 940228K/970752K available (7168K kernel code, 575K rwdata, 2076K rodata, 1024K init, 706K bss, 22332K reserved, 8192K cma-reserved)
  2988. [    0.000000] Virtual kernel memory layout:
  2989.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  2990.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  2991.                    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  2992.                    lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
  2993.                    modules : 0x7f000000 - 0x80000000   (  16 MB)
  2994.                      .text : 0x80008000 - 0x80800000   (8160 kB)
  2995.                      .init : 0x80b00000 - 0x80c00000   (1024 kB)
  2996.                      .data : 0x80c00000 - 0x80c8fef4   ( 576 kB)
  2997.                       .bss : 0x80c96f34 - 0x80d478b4   ( 707 kB)
  2998. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  2999. [    0.000000] ftrace: allocating 25267 entries in 75 pages
  3000. [    0.000000] Hierarchical RCU implementation.
  3001. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  3002. [    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  3003. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  3004. [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  3005. [    0.000023] Switching to timer-based delay loop, resolution 52ns
  3006. [    0.000274] Console: colour dummy device 80x30
  3007. [    0.000806] console [tty1] enabled
  3008. [    0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  3009. [    0.000883] pid_max: default: 32768 minimum: 301
  3010. [    0.001210] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  3011. [    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  3012. [    0.002201] Disabling memory control group subsystem
  3013. [    0.002294] CPU: Testing write buffer coherency: ok
  3014. [    0.002717] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  3015. [    0.003133] Setting up static identity map for 0x100000 - 0x10003c
  3016. [    0.003272] Hierarchical SRCU implementation.
  3017. [    0.003964] smp: Bringing up secondary CPUs ...
  3018. [    0.004756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  3019. [    0.005591] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  3020. [    0.006409] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  3021. [    0.006513] smp: Brought up 1 node, 4 CPUs
  3022. [    0.006585] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  3023. [    0.006606] CPU: All CPU(s) started in HYP mode.
  3024. [    0.006624] CPU: Virtualization extensions available.
  3025. [    0.007517] devtmpfs: initialized
  3026. [    0.017711] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
  3027. [    0.018383] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  3028. [    0.018628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  3029. [    0.018672] futex hash table entries: 1024 (order: 4, 65536 bytes)
  3030. [    0.019239] pinctrl core: initialized pinctrl subsystem
  3031. [    0.020035] NET: Registered protocol family 16
  3032. [    0.022635] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  3033. [    0.027463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  3034. [    0.027495] hw-breakpoint: maximum watchpoint size is 8 bytes.
  3035. [    0.027705] Serial: AMBA PL011 UART driver
  3036. [    0.029376] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  3037. [    0.029857] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  3038. [    0.061549] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
  3039. [    0.062999] SCSI subsystem initialized
  3040. [    0.063243] usbcore: registered new interface driver usbfs
  3041. [    0.063313] usbcore: registered new interface driver hub
  3042. [    0.063412] usbcore: registered new device driver usb
  3043. [    0.070075] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-16 17:30
  3044. [    0.071409] clocksource: Switched to clocksource arch_sys_counter
  3045. [    0.147950] VFS: Disk quotas dquot_6.6.0
  3046. [    0.148062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  3047. [    0.148263] FS-Cache: Loaded
  3048. [    0.148478] CacheFiles: Loaded
  3049. [    0.157380] NET: Registered protocol family 2
  3050. [    0.158115] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  3051. [    0.158244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  3052. [    0.158447] TCP: Hash tables configured (established 8192 bind 8192)
  3053. [    0.158592] UDP hash table entries: 512 (order: 2, 16384 bytes)
  3054. [    0.158653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  3055. [    0.158896] NET: Registered protocol family 1
  3056. [    0.159368] RPC: Registered named UNIX socket transport module.
  3057. [    0.159391] RPC: Registered udp transport module.
  3058. [    0.159410] RPC: Registered tcp transport module.
  3059. [    0.159429] RPC: Registered tcp NFSv4.1 backchannel transport module.
  3060. [    0.160916] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  3061. [    0.163694] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  3062. [    0.171851] FS-Cache: Netfs 'nfs' registered for caching
  3063. [    0.172478] NFS: Registering the id_resolver key type
  3064. [    0.172520] Key type id_resolver registered
  3065. [    0.172540] Key type id_legacy registered
  3066. [    0.172568] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  3067. [    0.174517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  3068. [    0.174673] io scheduler noop registered
  3069. [    0.174695] io scheduler deadline registered (default)
  3070. [    0.174990] io scheduler cfq registered
  3071. [    0.175012] io scheduler mq-deadline registered
  3072. [    0.175031] io scheduler kyber registered
  3073. [    0.177317] BCM2708FB: allocated DMA memory fad00000
  3074. [    0.177362] BCM2708FB: allocated DMA channel 0 @ bb813000
  3075. [    0.227300] Console: switching to colour frame buffer device 228x61
  3076. [    0.257686] bcm2835-rng 3f104000.rng: hwrng registered
  3077. [    0.257956] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  3078. [    0.258635] vc-sm: Videocore shared memory driver
  3079. [    0.259039] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  3080. [    0.269016] brd: module loaded
  3081. [    0.278107] loop: module loaded
  3082. [    0.278242] Loading iSCSI transport class v2.0-870.
  3083. [    0.279078] libphy: Fixed MDIO Bus: probed
  3084. [    0.279307] usbcore: registered new interface driver lan78xx
  3085. [    0.279522] usbcore: registered new interface driver smsc95xx
  3086. [    0.279699] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  3087. [    0.307769] dwc_otg 3f980000.usb: base=0xf0980000
  3088. [    0.508094] Core Release: 2.80a
  3089. [    0.508197] Setting default values for core params
  3090. [    0.508357] Finished setting default values for core params
  3091. [    0.708753] Using Buffer DMA mode
  3092. [    0.708856] Periodic Transfer Interrupt Enhancement - disabled
  3093. [    0.709017] Multiprocessor Interrupt Enhancement - disabled
  3094. [    0.709172] OTG VER PARAM: 0, OTG VER FLAG: 0
  3095. [    0.709303] Dedicated Tx FIFOs mode
  3096. [    0.709833] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
  3097. [    0.710130] FIQ FSM acceleration enabled for :
  3098.                Non-periodic Split Transactions
  3099.                Periodic Split Transactions
  3100.                High-Speed Isochronous Endpoints
  3101.                Interrupt/Control Split Transaction hack enabled
  3102. [    0.717507] dwc_otg: Microframe scheduler enabled
  3103. [    0.717557] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e8e80
  3104. [    0.724463] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e91e8 length 36
  3105. [    0.731284] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  3106. [    0.738158] dwc_otg 3f980000.usb: DWC OTG Controller
  3107. [    0.744920] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  3108. [    0.751785] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  3109. [    0.758539] Init: Port Power? op_state=1
  3110. [    0.765249] Init: Power Port (0)
  3111. [    0.772108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  3112. [    0.778857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3113. [    0.785776] usb usb1: Product: DWC OTG Controller
  3114. [    0.792599] usb usb1: Manufacturer: Linux 4.14.62-v7+ dwc_otg_hcd
  3115. [    0.799465] usb usb1: SerialNumber: 3f980000.usb
  3116. [    0.806865] hub 1-0:1.0: USB hub found
  3117. [    0.813545] hub 1-0:1.0: 1 port detected
  3118. [    0.820654] dwc_otg: FIQ enabled
  3119. [    0.820659] dwc_otg: NAK holdoff enabled
  3120. [    0.820664] dwc_otg: FIQ split-transaction FSM enabled
  3121. [    0.820673] Module dwc_common_port init
  3122. [    0.820914] usbcore: registered new interface driver usb-storage
  3123. [    0.827718] mousedev: PS/2 mouse device common for all mice
  3124. [    0.834488] IR NEC protocol handler initialized
  3125. [    0.841176] IR RC5(x/sz) protocol handler initialized
  3126. [    0.847845] IR RC6 protocol handler initialized
  3127. [    0.854476] IR JVC protocol handler initialized
  3128. [    0.860890] IR Sony protocol handler initialized
  3129. [    0.867378] IR SANYO protocol handler initialized
  3130. [    0.873888] IR Sharp protocol handler initialized
  3131. [    0.880268] IR MCE Keyboard/mouse protocol handler initialized
  3132. [    0.886812] IR XMP protocol handler initialized
  3133. [    0.894004] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  3134. [    0.900933] bcm2835-cpufreq: min=600000 max=1400000
  3135. [    0.907953] sdhci: Secure Digital Host Controller Interface driver
  3136. [    0.914645] sdhci: Copyright(c) Pierre Ossman
  3137. [    0.921777] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  3138. [    0.928717] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  3139. [    0.935488] sdhci-pltfm: SDHCI platform and OF driver helper
  3140. [    0.944301] ledtrig-cpu: registered to indicate activity on CPUs
  3141. [    0.951011] hidraw: raw HID events driver (C) Jiri Kosina
  3142. [    0.957805] usbcore: registered new interface driver usbhid
  3143. [    0.964417] usbhid: USB HID core driver
  3144. [    0.971685] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
  3145. [    0.979914] [vc_sm_connected_init]: start
  3146. [    0.990138] [vc_sm_connected_init]: end - returning 0
  3147. [    0.997465] Initializing XFRM netlink socket
  3148. [    1.004189] NET: Registered protocol family 17
  3149. [    1.010919] Key type dns_resolver registered
  3150. [    1.018033] Registering SWP/SWPB emulation handler
  3151. [    1.025266] registered taskstats version 1
  3152. [    1.032036] Indeed it is in host mode hprt0 = 00021501
  3153. [    1.047368] uart-pl011 3f201000.serial: cts_event_workaround enabled
  3154. [    1.054281] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  3155. [    1.063107] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  3156. [    1.070011] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  3157. [    1.126990] random: fast init done
  3158. [    1.133797] sdhost: log_buf @ bad13000 (fad13000)
  3159. [    1.173458] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  3160. [    1.181671] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  3161. [    1.189880] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  3162. [    1.199214] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  3163. [    1.221434] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  3164. [    1.228913] of_cfs_init
  3165. [    1.235507] of_cfs_init: OK
  3166. [    1.241444] usb 1-1: new high-speed USB device number 2 using dwc_otg
  3167. [    1.241574] Indeed it is in host mode hprt0 = 00001101
  3168. [    1.255230] Waiting for root device PARTUUID=0a147cfd-02...
  3169. [    1.296877] mmc1: new high speed SDIO card at address 0001
  3170. [    1.361637] mmc0: host does not support reading read-only switch, assuming write-enable
  3171. [    1.372144] mmc0: new high speed SDHC card at address aaaa
  3172. [    1.379148] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  3173. [    1.390149]  mmcblk0: p1 p2
  3174. [    1.425448] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  3175. [    1.432225] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  3176. [    1.448622] devtmpfs: mounted
  3177. [    1.458366] Freeing unused kernel memory: 1024K
  3178. [    1.481731] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  3179. [    1.481908] NOHZ: local_softirq_pending 40
  3180. [    1.488516] NOHZ: local_softirq_pending 40
  3181. [    1.489639] NOHZ: local_softirq_pending 40
  3182. [    1.509002] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  3183. [    1.516700] hub 1-1:1.0: USB hub found
  3184. [    1.521779] NOHZ: local_softirq_pending 40
  3185. [    1.530176] NOHZ: local_softirq_pending 40
  3186. [    1.531774] NOHZ: local_softirq_pending 40
  3187. [    1.544356] hub 1-1:1.0: 4 ports detected
  3188. [    1.582047] NOHZ: local_softirq_pending 40
  3189. [    1.588672] NOHZ: local_softirq_pending 40
  3190. [    1.595057] NOHZ: local_softirq_pending 40
  3191. [    1.601388] NOHZ: local_softirq_pending 40
  3192. [    1.871463] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  3193. [    1.924382] systemd[1]: System time before build time, advancing clock.
  3194. [    2.001751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
  3195. [    2.008240] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  3196. [    2.015369] hub 1-1.1:1.0: USB hub found
  3197. [    2.021872] hub 1-1.1:1.0: 3 ports detected
  3198. [    2.052192] NET: Registered protocol family 10
  3199. [    2.059497] Segment Routing with IPv6
  3200. [    2.077227] ip_tables: (C) 2000-2006 Netfilter Core Team
  3201. [    2.102459] random: systemd: uninitialized urandom read (16 bytes read)
  3202. [    2.113952] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  3203. [    2.121472] systemd[1]: Detected architecture arm.
  3204. [    2.156106] systemd[1]: Set hostname to <darach>.
  3205. [    2.196646] random: systemd: uninitialized urandom read (16 bytes read)
  3206. [    2.235632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  3207. [    2.381128] dwc_otg_handle_wakeup_detected_intr lxstate = 2
  3208. [    2.622376] systemd[1]: Listening on udev Control Socket.
  3209. [    2.637651] systemd[1]: Listening on Journal Socket.
  3210. [    2.652846] systemd[1]: Created slice User and Session Slice.
  3211. [    2.667911] systemd[1]: Listening on fsck to fsckd communication Socket.
  3212. [    2.683508] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  3213. [    2.724888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  3214. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  3215. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  3216. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  3217. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  3218. [    3.240965] libphy: lan78xx-mdiobus: probed
  3219. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  3220. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  3221. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  3222. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  3223. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  3224. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  3225. [    4.443078] usbcore: registered new interface driver brcmfmac
  3226. [    4.689993] random: crng init done
  3227. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  3228. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  3229. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  3230. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  3231. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  3232. [    5.924523] brcmfmac: power management disabled
  3233. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  3234. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  3235. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  3236. [   12.020101] Bluetooth: Core ver 2.22
  3237. [   12.020160] NET: Registered protocol family 31
  3238. [   12.020163] Bluetooth: HCI device and connection manager initialized
  3239. [   12.020178] Bluetooth: HCI socket layer initialized
  3240. [   12.020185] Bluetooth: L2CAP socket layer initialized
  3241. [   12.020206] Bluetooth: SCO socket layer initialized
  3242. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  3243. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  3244. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  3245. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  3246. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  3247. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  3248. [   12.347349] Bluetooth: BNEP socket layer initialized
  3249. kevin@darach:/dev $ dmesg /q phrik ptpb
  3250.  
  3251. Usage:
  3252.  dmesg [options]
  3253.  
  3254. Display or control the kernel ring buffer.
  3255.  
  3256. Options:
  3257.  -C, --clear                 clear the kernel ring buffer
  3258.  -c, --read-clear            read and clear all messages
  3259.  -D, --console-off           disable printing messages to console
  3260.  -E, --console-on            enable printing messages to console
  3261.  -F, --file <file>           use the file instead of the kernel log buffer
  3262.  -f, --facility <list>       restrict output to defined facilities
  3263.  -H, --human                 human readable output
  3264.  -k, --kernel                display kernel messages
  3265.  -L, --color[=<when>]        colorize messages (auto, always or never)
  3266.                                colors are enabled by default
  3267.  -l, --level <list>          restrict output to defined levels
  3268.  -n, --console-level <level> set level of messages printed to console
  3269.  -P, --nopager               do not pipe output into a pager
  3270.  -r, --raw                   print the raw message buffer
  3271.  -S, --syslog                force to use syslog(2) rather than /dev/kmsg
  3272.  -s, --buffer-size <size>    buffer size to query the kernel ring buffer
  3273.  -u, --userspace             display userspace messages
  3274.  -w, --follow                wait for new messages
  3275.  -x, --decode                decode facility and level to readable string
  3276.  -d, --show-delta            show time delta between printed messages
  3277.  -e, --reltime               show local time and time delta in readable format
  3278.  -T, --ctime                 show human-readable timestamp (may be inaccurate!)
  3279.  -t, --notime                don't show any timestamp with messages
  3280.      --time-format <format>  show timestamp using the given format:
  3281.                                [delta|reltime|ctime|notime|iso]
  3282. Suspending/resume will make ctime and iso timestamps inaccurate.
  3283.  
  3284.  -h, --help     display this help and exit
  3285.  -V, --version  output version information and exit
  3286.  
  3287. Supported log facilities:
  3288.     kern - kernel messages
  3289.     user - random user-level messages
  3290.     mail - mail system
  3291.   daemon - system daemons
  3292.     auth - security/authorization messages
  3293.   syslog - messages generated internally by syslogd
  3294.      lpr - line printer subsystem
  3295.     news - network news subsystem
  3296.  
  3297. Supported log levels (priorities):
  3298.    emerg - system is unusable
  3299.    alert - action must be taken immediately
  3300.     crit - critical conditions
  3301.      err - error conditions
  3302.     warn - warning conditions
  3303.   notice - normal but significant condition
  3304.     info - informational
  3305.    debug - debug-level messages
  3306.  
  3307.  
  3308. For more details see dmesg(1).
  3309. kevin@darach:/dev $ dmesg > message.txt
  3310. -bash: message.txt: Toegang geweigerd
  3311. kevin@darach:/dev $ cd
  3312. kevin@darach:~ $ dmesg > message.txt
  3313. kevin@darach:~ $ nano message.txt
  3314. kevin@darach:~ $ vi message.txt
  3315. [    2.741564] systemd[1]: Listening on udev Kernel Socket.
  3316. [    2.821510] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
  3317. [    2.962107] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
  3318. [    2.962118] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  3319. [    3.240965] libphy: lan78xx-mdiobus: probed
  3320. [    3.447642] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  3321. [    3.587954] systemd-journald[113]: Received request to flush runtime journal from PID 1
  3322. [    4.291528] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  3323. [    4.296315] bcm2835_alsa bcm2835_alsa: card created with 8 channels
  3324. [    4.435835] brcmfmac: F1 signature read @0x18000000=0x15264345
  3325. [    4.442325] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
  3326. [    4.443078] usbcore: registered new interface driver brcmfmac
  3327. [    4.689993] random: crng init done
  3328. [    4.690011] random: 7 urandom warning(s) missed due to ratelimiting
  3329. [    4.766534] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  3330. [    4.767082] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
  3331. [    5.450416] uart-pl011 3f201000.serial: no DMA platform data
  3332. [    5.924509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  3333. [    5.924523] brcmfmac: power management disabled
  3334. [    5.971597] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  3335. [    6.171271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  3336. [    6.443823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  3337. [   12.020101] Bluetooth: Core ver 2.22
  3338. [   12.020160] NET: Registered protocol family 31
  3339. [   12.020163] Bluetooth: HCI device and connection manager initialized
  3340. [   12.020178] Bluetooth: HCI socket layer initialized
  3341. [   12.020185] Bluetooth: L2CAP socket layer initialized
  3342. [   12.020206] Bluetooth: SCO socket layer initialized
  3343. [   12.036939] Bluetooth: HCI UART driver ver 2.3
  3344. [   12.036949] Bluetooth: HCI UART protocol H4 registered
  3345. [   12.036952] Bluetooth: HCI UART protocol Three-wire (H5) registered
  3346. [   12.037093] Bluetooth: HCI UART protocol Broadcom registered
  3347. [   12.347329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  3348. [   12.347336] Bluetooth: BNEP filters: protocol multicast
  3349. [   12.347349] Bluetooth: BNEP socket layer initialized
  3350.  
  3351.